See Printable Version Email This Page to a Friend

BackPage Primer from Environmental Building News
October 1, 2007

Binders in Manufactured Wood Products:
Beyond Formaldehyde

Manufactured wood products—including plywood, oriented-strand board (OSB), laminated-strand lumber, particleboard, and medium-density fiberboard (MDF)—have the environmental advantage of being made from small-diameter or other low-quality trees or waste from wood-processing operations, conserving higher-quality timber. With these products, the wood is peeled into thin veneers, chipped into small strands or flakes, or ground into wood flour; in each case, the pieces are then glued to produce a durable and stable panel or lumber product.

Two glues, or binders as they are called in the industry, dominate the manufactured wood products industry: urea formaldehyde (UF) and phenol formaldehyde (PF). For interior-grade products, including particleboard, MDF, and hardwood plywood, UF binders have long been more popular because of their low cost and light color compared with PF binders. For exterior-grade applications PF binders are favored because of their better moisture resistance.

While UF binders are significantly less expensive than PF binders, they give off a lot more formaldehyde—a volatile compound that is classified as a known human carcinogen. Formaldehyde’s other health impacts include respiratory problems; eye, nose, and throat irritation; allergic reactions; and depression. Its emissions can be recognized by the telltale sweet smell in most new kitchen and bath cabinets.

Partly due to concerns about formaldehyde emissions and in response to new California regulations that will restrict formaldehyde emissions (see EBN Vol. 15, No. 7), the industry has introduced other binders. SierraPine has long used methyl diisocyanate (MDI), a polyurethane binder, in its Medex and Medite II MDF, and since 2006 in its Arreis particleboard. MDI contributes to a better indoor environment for building occupants—once cured, it is extremely stable with virtually no offgassing—but it is extremely toxic in the factory.

Some OSB manufacturers have also used MDI, as does TrusJoist with its TimberStrand laminated-strand lumber. MDI is even more moisture-resistant than PF, making Medex appropriate for outdoor signage. Particleboard made from straw uses MDI instead of UF or PF binders—mostly because the MDI adheres better to the straw fiber. Several particleboard products, including Roseburg SkyBlend and SierraPine Encore, also use PF rather than UF binders (see EBN Vol. 14, No. 9 and Vol. 16, No. 8).

Given the concerns about formaldehyde, a lot of R&D is going into formaldehyde-free binders for manufactured wood products. Researchers at Oregon State University, inspired in part by the ability of mussels to form an extremely durable adhesion underwater, developed a formaldehyde-free, soy-based binder, now produced by Hercules and used in Columbia Forest Products’ PureBond hardwood plywood (see EBN Vol. 14, No. 6).

Because most binders are more expensive than UF, we can expect manufactured wood product prices to increase to some extent as UF is eliminated.
DISCUSSIONS

There are no comments for this page yet.

Log in to add comments - Help with comments

RELATED ARTICLES

EBN: Product Review - August 2007
Image 1
EBN: Product Review - September 2005
Image 1
EBN: Product Review - June 2005

RELATED PRODUCTS
Product Image: SkyBlend UF-Free Particle Board
Roseburg Forest Products
Product Image: FSC-Certified, Formaldehyde-Free Wood Panel Products
Columbia Forest Products
Roseburg Forest Products

RELATED CATEGORIES

CSI DIVISIONS AND SECTIONS
CSI Section 06 11 13
CSI Section 06 25 00


IMAGE CREDITS:
1. (no credit)
DISCUSSIONS
There are no comments for this page yet.


RELATED ARTICLES
SierraPine Bets on Phenolic Particleboard
EBN: Product Review - August 2007

RELATED PRODUCTS

RELATED CSI LISTINGS
CSI Section 06 11 13