See Printable Version Email This Page to a Friend


Hanover House

This exterior photo of the south side of the Hanover, New Hampshire house shows the use of glass for solar heat gain in the winter.

Overview

  • Location: Hanover, NH
  • Building type(s): Single-family residential
  • New construction
  • 1,890 ft2 (175 m2)
  • Project scope: 2-story building
  • Rural setting
  • Completed October 1994

The Hanover House uses active and passive solar systems and high efficiency, resulting in extremely low energy consumption. It is a two-story, wood-framed, single-family residence built for a middle-aged couple with no children. The house has a basement and garage; three-quarters of the window area for the house is on the south side for passive solar gain. No combustion is used; energy needs not provided in solar gain are provided with electricity.

Environmental Aspects

The project goals were: to design a house that would be extremely energy-efficient and yet fit comfortably into the New England surroundings; to be cost-effective and allow for amenities other than energy-efficient equipment; to build for durability; and to design and construct a safe indoor environment—operable windows, fresh air, and least-toxic materials were priorities.

Owner & Occupancy

  • Owned and occupied by Larry and Toni, Individual(s)
  • Typically occupied by 2 people

Building Programs

Indoor Spaces:

Restrooms, Dining, Living quarters

Outdoor Spaces:

Wildlife habitat

Keywords

Graywater, Massing and orientation, Insulation levels, Airtightness, Passive solar, HVAC, Lighting control and daylight harvesting, Efficient lighting, On-site renewable electricity, Benign materials, Recycled materials, Daylighting, Natural ventilation, Ventilation effectiveness, Thermal comfort, Low-emitting materials, Indoor air quality monitoring


next topic:
Process
Go to next topic: Process
Last updated: 7/31/2003

Case Studies Database provided by the U.S. Department of Energy's
Building Technology Program, High Performance Buildings.