Championing the
Changemakers

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

What thoughts do you have? What have others said that you feel we want to capture?

The Vision Vacuum: What’s driving environmental and social progress in architecture today? What should be driving it, and where should we be going?

Hi there SD Leaders,

We're running an LCA on one of our projects that's about to start construction that has had serious embodied carbon goals and I got a result that really surprised me. I haven't been able to find any obvious/glaring issues with the work, but these results are strange enough that I'm not feeling confident. I'm hoping... Read more

Welcome to the quiz portion of LEED 2009: The Missing Manual.

Learning Objectives
Upon completing this course, participants will be able to:


1. Stay abreast of changes to LEED NC-2009.
2. Understand the more ambiguous aspects of LEED NC-2009.
3. Explain key interpretations of LEED NC-2009.
4.... Read more

Are there any metrics for % increase for building PH vs conventional?  These questions are always really hard- especially when there are none to compare to in area.

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

Hello Everyone,

I'm looking for projects in Chicago that are exemplary in at least one of the following topics: Biophilia, Sustainability, Resilience, or Well-being. I know there is overlap in these topics but we're doing an internal design exercise and are looking at how these different ideas relate and are articulated in buildings. We'... Read more

Congratulations to Mara Baum (HOK) and Alison Kwok (U of Oregon), FAIA! 

AIA announcement

Hello friends,

We are embarking on calculations to quantify avoided embodied carbon from converting an old school building into a multifamily project and I wanted to vet our methodology with you.

Our idea is to first establish a benchmark for a new replacement multifamily building based on published studies. We have found a few... Read more

Hello, All!  We haven't run WBLCA on a project that may include electrochromic glazing before, and it's embodied carbon footprint is really high in comparison to a more traditional double or triple pane IGU (we thought it would be higher, but this is 3-4x higher).  The EPD we have from Sage Glass for their triple pane electrochromic lists a GWP... Read more

Hi everyone - we have a new higher ed client who is committed to sustainability but not very knowledgeable about current topics such as carbon (both embodied and operational) or the electrification of buildings.  I need to educate them and would like to start with some easily-digestible background reading.  But as we all know, we're a bit dorky... Read more

Hello- If you use Procore....

Are your jobs using a template to conduct and create "reports" of their IAQ inspections? Did you set it up in forms or inspections? Would you mind sharing an example template with me? I know Green Badger has a great app to do this, which we use. We would use inspections in Procore for jobs that are not using... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Huge congratulations to everyone involved with a Top Ten winner this year! 

In a rare feat--Leddy Maytum Stacy got two!

Also P+W, Lake|Flato with Cooper Cary, WRNS, SOM, Olsen Kundig, KieranTimberlake, DLR--nice work! (And who is Studio27?)

Here's James Wilson's take on what's special about each winning project.

... Read more

Hi folks!

Do you have examples or case studies of projects with compelling examples of circularity/salvaged material reuse? We’re looking to go beyond the examples we've seen of furniture reuse or creating art from salvaged material, and we’d like to collect some examples to get our client excited about the possibilities in a deep... Read more

Hello, All,

Does anyone have experience with cove.tool (https://covetool.com/)?  Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines?  It came across our radar recently, and I'm wondering if the subscription might be worth a try.

Thanks! 

Maria

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more