I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more

For those of you who have attended the event above, I think you will agree this has been a high quality event.  But DFC is changing the forum this year. Instead of holding an annual event in September, this year they are holding 4 half day events around the country.  Attendance will be limited to 40 people and it is focused on sustainability... Read more

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

Hello, All, Is anyone familiar with One Click LCA software and resources?  Similarities/differences from a Tally or Athena approach?  Many thanks!

Good daylighting intentions can end up increasing glare and solar heat gain.

BuidlingGreen-Approved Lightshelves

We look for lightshelves designed to reflect direct sunlight onto the ceiling, turning what could potentially be glare into diffuse, ambient daylight that penetrates deep into the interior of a building.

Energy... Read more

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

Hi Gurus!

I'm desperately seeking any case studies (past/currently on the boards) of labs that have been designed without natural gas infrastructure (the topic I have to debate is about commercial spec labs but any lab case study, wet or dry, is welcomed). This is for a development authority that will be setting guidelines for new... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

RoseAnn’s role at BuildingGreen as Peer Networks Manager focuses on Peer Networks projects and planning events, including annual Peer Network Summits. 

Prior to BuildingGreen, RoseAnn worked in the nonprofit sector in customer-service based roles which allowed her to reconnect with her local community soon after earning her... Read more

Hi all,

We have an institutional client who has tired of LEED and is instead putting forth EarthCraft Light Commerical as a replacement certification (they like the performance verification & lower cost that ECLC provides).  Has anyone used ECLC? It seemed an odd choice but wanted to hear from others on their experiences. The... Read more

Hey there, SMEPLs:

Just a reminder that we are on the menu for the next in the Green Gurus Coffee Talk series. 

Please use this link to register

All the SMEPLs are invited to join in the conversation where we talk about things that rumble, squeal, gurgle and spark to our peers in the Design, Construction and Advisory peer... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

With the increasing need to support design with techncial expertise, I am curious to hear how others are meeting this challenge.  Do you build energy models in-house?  Do you have a team of experts whose sole responsibility is to support design teams with tasks such as energy modeling and LCA, or is that expertise distributed throughout the... Read more

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more