Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

Mark your calendars! Wednesday March 9th, 3-4pm ET (12-1pm PT) - Sustainability Leaders State of the Regions.

We’ve seen a lot of momentum building around the potential for regional Sustainability Leaders groups, and we want to learn how best to support this activity. On this call, we’ll have a few currently active regional groups share... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


Hello good people and fabulous troublemakers,

PFAS is in everything. In May, the NY Times published an article about this, along with the governments work to remove it from drinking water. https://www.nytimes.com/2024/04/10/climate/six-things-to-know-about-forever-chemicals.html

As you may know, a working group has been gathering... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more

I see Kjell Anderson, Mary Ann Lazarus and Daniel Overbey as the Green Gurus on this list - if i missed anybody apologies.

Congrats all around folks!

https://www.usgbc.org/articles/gbci-announces-2018-leed-fellows 

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more