Products recommended by BuildingGreen avoid potentially hazardous additives and binders and have high recycled content or offer superior energy performance.

Recommended cellulose insulations are derived from agricultural waste, offer superior moisture or air leakage performance, or impart lower indoor air quality concerns than other... Read more

AIA is looking for additional technical review jurors for their 2022 COTE Top Ten Award program particularly in the Water/Ecosystems and Energy/Discovery categories.  If you are interested please go to this webpage and complete the form.

Time is of the essence, so please complete the form no later than Friday, January 14, 2022.

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Hi all - passing on this request on behalf of Alan Scott. He is looking specifically for someone from the Gulf Coast region to round out the panel:

I am putting together a panel for a virtual session during Design Museum Week in April (Thursday, April 28). The description below outlines the conversation I am hoping to curate. I am... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

Green Gurus,

We'd love your feedback.

The MEP group is endeavoring to make progress on integrative design. It has been long accepted that integrative design is necessary to make real progress, but a lack of stellar results demonstrates that it is easier said than done.

What is your experience with successes and failures... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

We are hiring! Please share with any potential talented and passionate candidates.

https://archinect.com/jobs/entry/150052970/sustainable-design-specialist

ps. And, yes we recently rebranded for our 40th anniversary for those who may be confused :) 

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Hey Sages, Just lobbing this over the transome - not sure if anyone else cares :) but this would be a great group to dig in if anyone IS interested.

 For the past few years, I've been working on melding two completely separate worlds - our world (with typical project delivery) and the world of Agile (not just software development process... Read more

Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

This webinar occurred Thursday, December 15.

Attendance confirmation closed Friday, December 30.

Whether it’s the flooding in Pakistan, the devastation caused by Hurricane Ian in Florida, or the record-breaking wildfire season in Europe, climate change is in the news daily. Just as there’s an urgent need to reduce... Read more

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

The ASHRAE Conference staff is looking for more architecture sustainability leadership for planning their Integrated Design & Construction Conference (i'm sure they'd take contractors too!). The staff do almost all of the logistics themselves but they want thought leadership from across the industry to guide the focus, content.

See... Read more