Ventilation is essential for indoor air quality, but it can bring very hot or very cold outdoor air into conditioned space.

BuildingGreen-Approved ERVs

Heat-recovery ventilators (HRVs) and energy-recovery ventilators (ERVs) can save energy by capturing nearly all of the heat in the air being exchanged. BuildingGreen approves:... Read more

What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?

Please mark your calendars to join BuildingGreen and HKS for the 2018 Pre-Greenbuild SDL Show & Tell on Tuesday, Nov. 13th, 2018 from 7pm - 9:30pm at HKS, 125 S Clark Street, Chicago, IL

We will be sending out a registration link next week. Space is limited. 

Thanks to Rand Ekman and all those at HKS for opening their doors... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to... Read more

We are working on a Core & Shell project with a developer that we work with frequently. I'm looking for advice on best approaches to achieving the Whole Building Life Cycle Assessment credit- we haven't used TALLY and done this type of analysis before. What are some approaches to achieving this credit that others have found successful? I... Read more

We're now mid-way through Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early in addition to... Read more

test

Hello All,

I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content.  I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR.  From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more

Hi folks,

As you've no doubt heard from us by now (several times), in lieu of Summer Summits this year we're offering a combination of events this fall. Our series kicked off last week with a great Regional Mini-Summit in Boston. Regional events like this were in our plans before COVID blew everything up, so this one was a long-time... Read more

Welcome to the quiz portion of Verifying Performance with Building Enclosure Commissioning.

Learning Objectives
Upon completing this course, participants will be able to:


1. Reason why the enclosure is fundamental to a sustainable building.
2. Explain why energy goals are less likely to be achieved without... Read more

Hi - some of you may have received an invite to the White House for a 3-hr session to continue the discussion on the Net Zero Emissions building that they released earlier this year. This discussion will be on embodied carbon. I have no idea who the invite went to. If I beg I may be able to go, but if there are plenty of other Architects that... Read more

Hi,

HKS is seeking two seasoned sustainability leaders to be part of the DesignGreen Team embedded into either our Mission Critical and Commercial Mixed Use practice. In general, the role is to service clients and drive sustainable design quality forward. We have a great team and need even more wise, energetic, creative, and committed... Read more

We are having trouble sourcing a LEED compliant wallcovering adhesive. We specified Roman Pro-880 which is low VOC but doesn't have sufficient back up for TVOCs. Have you had success with other products?

Hi Everyone- as a follow up to the 5 minute presentation I did during the recent Virtual Summit-Palooza, I am pleased to announce that the Sustainability Action Plan Guidance Document created by the AIA 2030 Working Group is finished and released.  Please share!

http://content.aia.org/sites/default/files/2021-03/... Read more

Products recommended by BuildingGreen avoid potentially hazardous additives and binders and have high recycled content or offer superior energy performance.

Recommended cellulose insulations are derived from agricultural waste, offer superior moisture or air leakage performance, or impart lower indoor air quality concerns than other... Read more

Hello all, excuse the blast and the short timeline -- while not explicity sustainability-related, this is a great way to connect with the future of the profession, and can be a great opportunity for SDL firms on the west coast (a number of SDL firms already participate), specifically in Tacoma, Olympia, San Francisco, Sacramento, or San Diego.... Read more