Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Hi All, 

The rural concrete supplier that is used for most of our projects sources their fly ash from a nearby coal burning plant that is scheduled to be closed in the next two years. In anticipation of this, they are looking into alternative fly ash sources and SCM options and we'd like to provide suggestions.

Does anyone have... Read more

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to... Read more

Hello all,

Does anyone know of any Rebate Program for either induction cooking equipment or kitchen electrification (new or existing)? Looking for any local or state or even federal programs (outside of California) that incentivize designing/building/retrofitting towards an all electric kitchen for any program type (institutional, single... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

Here's the Core Purpose for this group that came out of the Inaugural Summit.

We're off and running!

Hi all, 

Following the SCL Summit back in November, the Waste Subgroup agreed to complete a Model Waste Management Plan to serve as a contractor commitment to reduce construction waste. I distributed the attached (very rough) draft back in Jan., and received some good feedback via forum comments. 

We would like to set up a call to... Read more

Exterior paints, stains, and primers—particularly alkyds—can have very high volatile organic compound (VOC) levels and can contain numerous chemicals of concern.

BuildingGreen-Approved Coatings

BuildingGreen lists exterior coatings that meet the South Coast Air Quality Management District’s (SCAQMD) VOC requirements of 50 grams... Read more

Amanda is BuildingGreen's Peer Networks Manager, working behind the scenes to support the Peer Networks team and members. They are passionate about sustainable design and love helping people find tangible ways to help the planet.

Prior to joining BuildingGreen in 2023, Amanda was a campaigns coordinator at a food justice... Read more

All,

My team at WSP has a pretty awesome senior position available and I wanted to bring it the group's attention as we try to get the word out. The role is to lead our Sustainable Design Analytics group (part of our Built Ecology team), ideally based in CA or NYC, but open to wherever good candidates may be. If anyone knows someone that... Read more

Are there any metrics for % increase for building PH vs conventional?  These questions are always really hard- especially when there are none to compare to in area.

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

Welcome to the quiz portion of Verifying Performance with Building Enclosure Commissioning.

Learning Objectives
Upon completing this course, participants will be able to:


1. Reason why the enclosure is fundamental to a sustainable building.
2. Explain why energy goals are less likely to be achieved without... Read more

We’ve reached the maximum capacity of our venue for the Show-and-Tell next Tuesday at Greenbuild in DC. We also have a full slate of great presentations lined up. Thank you, Perkins Eastman, for hosting!

RSVP is now closed—we're looking forward to a packed house and we won't be able to let folks in who are not on the list.

We can'... Read more

Last summer I shared a request here for folks to take a survey we had open that aimed to understand how architects and engineers are (or aren't) using climate projections to inform design. This white paper, written in collaboration with HGA and the University of Minnesota Climate Adaptation Partnership, reports on the results of that research. ... Read more