Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

All,

I wanted to spread the word to all of you that AIA Minnesota is hosting a virtual edition of Materials Matter, a five-part series starting next Wednesday 3/24, from 10AM-3PM Central Time on five Wednesdays throughout March, April and May. Come to one ($15 per session) or all ($60 for the whole series of 20 CEUs, including GBCI... Read more

Anyone know of tools/methodologies for estimating embodied carbon and carbon sequestration potential of individual green infrastructure projects (e.g. bioswale along bikeway)? I've seen tools for the larger scale (e.g. land use change) as well as specific to trees (e.g. i-Tree), but these don't fully meet my needs.

Thanks!

Hello all,

We are looking at ways we can use our specs to reduce toxicity in projects and one step towards that goal may be to require RoHS compliant lighting, switches, alarms, meters, etc., as required by the Small Electrical Components exception in the Living Building Challenge. Based on LBC projects I have been involved with, it... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

This report is no longer being sold.

If you have questions, please contact customersupport@buildinggreen.com

Whether you're selecting windows for a 99-unit condo project or for a single-family home, you're making a choice your client will have to live with for years, maybe decades.

And no matter how large or small... Read more

An induction range capable of replacing a standard gas range offers the potential of significantly reducing the energy required for ventilation in a commercial kitchen and improves IAQ at home.

We look for commercial-scale as well as residential induction cooktops and ranges designed to reduce indoor... Read more

I have a colleague researching existing, proposed, or anticipated changes to urban planning and building codes that encourage lower carbon footprints.

Can anyone comment on or point me to resources on how cities are using carbon footprint analysis and carbon reduction in permitting, now or in the future?

Some specific topics that... Read more

Hello Gurus!

The City of Cambridge is expanding on its 2015 NZ Climate Action plan to focus on embodied carbon.

If any of you have experience conducting LCA/WBLCA (whether you are an architect, engineer or consultant) your input is invaluable. The City is looking for feedback so that they can shape the program, as it evolves, to... Read more

Hi,

Does anyone have experience or advice with installing temporary weather stations to gather data? We have a couple of projects coming up on existing occupied sites, and I would like to get what data I can from the sites to supplement the city weather file which is, as always, measured absolutely miles from site. There are thousands of... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

For the fourth year in a row, we’re proud to release our sustainability survey findings, based on the real-world knowledge and experience of our clients and partners, to help determine how sustainability, resilience and wellness are perceived by the commercial real estate industry. We’ve compiled these survey results in our 2019 report, which... Read more

Please mark your calendars to join BuildingGreen and HKS for the 2018 Pre-Greenbuild SDL Show & Tell on Tuesday, Nov. 13th, 2018 from 7pm - 9:30pm at HKS, 125 S Clark Street, Chicago, IL

We will be sending out a registration link next week. Space is limited. 

Thanks to Rand Ekman and all those at HKS for opening their doors... Read more

Welcome to the quiz portion of Building as an Organism: Understanding the Integrative Process Credit in LEED v4 Projects (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why integrative design is the key to cost-effective, high performance green buildings and LEED... Read more

The BuildingGreen/GreenStep exam prep materials are... Read more

Welcome to the quiz portion of Making Your Own Electricity: Onsite Photovoltaic Systems.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the difference between crystalline and thin-film photovoltaic technologies, and the uses of each.
2. Describe the ways in which PV... Read more