Welcome to the quiz portion of Can We Replace Foam Insulation?

Learning Objectives
Upon completing this course, participants will be able to:


1. List four ways in which foam is environmentally problematic and provide four examples of foam replacements.
2. Discuss the industry's relationship with foam... Read more

Conventional heating systems burn fossil fuels on the building site or use outrageous amounts of electricity.

BuildingGreen-Approved Heat Pumps

The best heat pumps solve both these problems and provide efficient cooling. BuildingGreen approves air-source heat pumps with minimum HSPF and SEER levels of 10 and 20, respectively.... Read more

Hi All, 

My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.  

Is anyone tracking this for job sites?... Read more

Hello Green Gurus,

Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.

This event is connected with the Summit-... Read more

Hi everyone, 

We’re excited to announce that registration for the Spring 2024 Sustainable Construction Leaders Summit is now open! Join us at Perkins&Will’s Atlanta office on May 6th, the day before the Living Future Conference. Register early to save your seat, and feel free to reach out to me with any questions at amanda@... Read more

We are looking for someone early in their career to take over our green building certifications (mostly LEED).  They will also be helping our office build expertise in other certifications, keeping up with green building ordinances in our markets, and (hopefully) help me answer all those questions about energy codes. 

They do not need... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

Hello Green Gurus,

Here is the information for your October Peer Networks Webinar, Advocating for Electrification. We hope you will join us!

Register HERE.

Advocating for Electrification
October 26th, 2020
1pm - 2pm ET (10am - 11am PT)

Description
Hear from leaders in the AEC and policy community on... Read more

Does anyone have a Passive House detailing resource recommendation? Something that is applicable to wood over podium and/or metal framing construction? I have the book below but looking for something more applicable.

Passive House Details: Solutions for High-Performance Design 1st Edition

by Donald B. Corner (Author), Jan C.... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hello Sustainable Advising Leaders,

Happy 2022! Here's your reminder that this network's first monthly call of the year is next Tuesday, January 25 at 3pm ET. Zoom call information is below.

All members of the network are welcome! You can see the agenda here. Here's a quick preview:

Welcome to the quiz portion of Design for Adaptation: Living in a Climate-Changing World.

Learning Objectives
Upon completing this course, participants will be able to:

1. Identify the major known causes of climate change
2. Describe the range and reliability of predicted temperature changes.
3. List... Read more