I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

Hi All ... I'm seeking suggestions for an ecologically minded landscape/site/civil consultant. Ideally with strong knowledge about Florida ecosystems. Thanks much for any sharing.

Rand Ekman

[email protected]

Have you been perusing the recently launched Contractor's Commitment and thought to yourself, 'Companies are going to need more guidance/templates/resources if they're actually going to implement this thing'? Good--now's your chance to help develop those resources.

The Contractor's Commitment Working Group is meeting December 1, 1pm ET.... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Composite windows come in two basic types: fiberglass, and wood/plastic composite.

BuildingGreen-Approved Windows

Fiberglass and other composite window lines have NFRC unit U-factors of 0.20 or lower. Higher U-factors are allowed for products that include significant recycled content.

Manufacturers also must demonstrate... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more

Jill is a licensed architect with WELL and Living Future accreditation. Through her experience leading sustainable achievement and verification on projects in the workplace, K-12, civic, and retail/mixed use typologies, Jill brings her passion for sustainable materials across vetting categories, AEC disciplines, bid scenarios, and market... Read more

Curious if folks know of any resources on hempcrete, specific to durability.  We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more

Hi Green Gurus!

We’ve gotten GREAT feedback and input from many of you via the survey about our planned fall events. You expressed a lot of interest in all the events we proposed: a series of in-depth Integrative Design Jams, separate Summits for SDL and SCL, and regional all-network workshops, starting with one in Boston—so we’re moving... Read more

Happy Friday Everyone!

Hoping to add a bit of excitement to the end of your week: 

Here is the Sustainable Design Leaders 2020 Summer Summit Report. 

Enjoy!

RoseAnn for Nadav, Candace, and the BuildingGreen team

Welcome to the quiz portion of Finding Furniture Without Toxic Flame Retardants.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why avoiding toxic flame retardants is important.
2. Explain how we were swindled into dosing our buildings and our bodies with flame... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Hello. Has anyone tackled "tracking emissions from all company-purchased cloud computing" yet? This is in the best category for CC 2.0 and wanted to ask.

How "deep" did you go? 

This was an interesting read, but still left me a little confused about how far I need to go and even what questions to ask:   

https://medium.com/... Read more