Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

Hi there SCLers,

Hope everyone is safe and healthy. I am posting on behalf of the Steeering Committee to let you know that the Committee has now adopted a Core Purpose Statement for the SCL Group. Please give it a quick read; we will likely sit with this and spend some time internalizing what it means at the upcoming Summit. 

The... Read more

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.

This just in from AIA Leadership:

https://www.aia.org/pages/6522198-aia-statement-on-scotus-decision-in-west-v

Please share this with your networks.

Thanks.

Mary Ann

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more

Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Hello Everyone,

Here is the information and invitation to complete the SCL Demographics Survey! If you have multiple company colleagues on this forum (you can check in the group list here click "Group members" tab), please coordinate to have only one of you submit survey responses.

If you would you like to gather your answers... Read more

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Hi all, 

I have a project where we are providing the main sustainability lead role, but are in need of an LBC sub to provide additional expertise (and fulfill a contract requirement). We are ideally looking for someone who has experience with more than one project that has completed the process, and especially for (large) commercial... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Hi, folks! Posting on behalf of an individual outside of the networks. Are you seeking a sustainability and materials specialist in-house? This candidate great qualifications, including:

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

Welcome to the quiz portion of The Death and Rebirth of DC Power. 

Learning Objectives
Upon completing this course, participants will be able to:


Explain when and how to integrate DC power into buildings, and the benefits of doing so.

Understand the history and background of AC and DC power in the U.S.

... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more