Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

Hello Green Gurus!

We have some exciting details for the next All Peer Networks webinar on Design Agency & Civic Engagement: Building Sustainable Communities.

REGISTER HERE - Hope to see you there!

Design Agency & Civic Engagement: Building Sustainable Communities
June 25th, 2020
3pm - 4pm ET (Noon - 1pm... Read more

Hi everyone,

As you may know the ICC has changed the way the IECC will be written in the future and most of us think that will reduce the stringency of the future energy codes that are the biggest lever in the fight against climate change within the buildings sector.

So one of the best pathways forward is via ASHRAE, which has a... Read more

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

My apologies if I posted this question twice ont he forum - I am a newbie on this forum.

Anyone knows how to import an structural emobdied carbon project file into architectural project file of the same proejct to generate a combined Sankey graph?  My Building Transparency/CLF contacts haven't got back to me for a week now...

... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

Hello all,

Could any of you point me out to recent studies showing the health impacts of plastic piping vs. copper piping? 

We have a project where NIRON or Aquatherm are proposed as a VE item in lieu of copper.  I know there is some studies showing PEX and PVC piping health impacts, but I can't seem to find anything on these 2... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Welcome to the quiz portion of Chemical Transparency: The HPD Issue.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss why chemical transparency matters and answer common technical and practical questions regarding HPDs.
2. Offer solutions for the legitimate concerns... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more