asdfasdf

Within the confines of the BuildingGreen safe space, I wanted to share the Forced Labor in the Building Material Supply Chain Mitigation Framework I shared at the 3/1 First Friday Fika. The intent is for this document to become public, but we are working through some permissions and final editing logistics. The project was collaborative... Read more

Hello -

We're hiring two interns this summer. One position is in Urban Design & Planning, the other is an architectural position split roughly equally between our Housing Studio and our Sustainability Resources Group. If you know of potential candidates who might be interested, please forward this link. http://www.seradesign.com/... Read more

Welcome to the quiz portion of The PVC Debate: A Fresh Look.

Learning Objectives
Upon completing this course, participants will be able to:


1. Examine the actual cost-effectiveness of PVC in terms of quality.
2. Explain what makes PVC a health hazard.
3. Recognize market effects of PVC's durability and... Read more

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

As some of you know, BuildingEase is the first (FREE) platform focused on building products that combines a workflow tool, waste exchange and marketplace (yes, you actually buy it all right from the site!).

The platform saves tons of hours, major headaches and streamlines workflow within a firm and across a team.

We are going to... Read more

Hello Everyone,

Here are some of the Show & Tell presentations from the 2019 SDL Winter Summit, enjoy!!

Best,

RoseAnn

Hello MEP Leaders,

Happy 2022! Here's your reminder that our virtual meetup for this month is coming up next Tuesday, January 11th at 2:00pm ET.

All members of the network are invited to join! The agenda for the call is available here.

Join Zoom Meeting
https://us02web.zoom.us/j/83598691786?pwd=... Read more

Quiz body text here

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more

Hello,

The Baltimore office for Hord Coplan Macht is looking to hire a Sustainability Coordinator.  Please find the specifics here https://workforcenow.adp.com/jobs/apply/posting.html?client=hcm2&jobId=4... or attached and pass along if you know of someone who may be a good fit.

Thank you,

Ara Massey 

Hi All,

At the SCL Summit in November 2019, the Carbon Group discussed meeting in Q1 2019 to craft an action plan for measuring and voluntarily disclosing carbon emissions from our operations.   To kickoff that effort, we will be having an online meeting. 

If your company is already disclosing greenhouse emissions or if that's... Read more