Hi All,

We are trying to make a case for hiring a full time sustainability specialist in our firm, and one of the arguments we want to use is that the ratio of sustainability specialists vs the ratio of full time employees in our company is quite low. That being said, I want to have an understanding of where other firms stand with this... Read more

Hi All,
We have a project in design with a large AV display for updating data. Anyone know of an AV team that thinks through both visual /acoustic performance in conjunction with energy use and environmental impact of the display? Replies on the peer networks hub or directly to me at alk@dskap.com work. 

Thank you! 

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more

Hi all -- 

We have a national restaurant client who is looking to source furniture (both indoor and outdoor) made with a minimum of 40% salvaged/recycled material, and they're very interested in finding a vendor that's woman- and/or minority-owned or that would qualify as a "disadvantaged organization" (their terminology).  They would... Read more

Are you getting questions, advice, and dubious sales pitches from all comers about how to design and run an HVAC system to combat infectious disease? You’re not alone. Engineers, facility managers, architects, and other building professionals are all... Read more

Welcome to the quiz portion of What Makes the Building Envelope Green? BuildingGreen’s Guide to Thermal & Moisture Protection Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe attributes of the greenest building envelope products.
2. Explain how to... Read more

tate 

A draft of AIA’s Top Ten Toolkit was just published!

http://bit.ly/COTEtoolkit

Hopefully useful for everyone toward making more very high performance buildings. More updates to come, including interactive tools like a superspreadsheet. 

All the best,

Tate

All,

I'm sure a few of you attended our recent  webinar on the LEED v4.1 LCA webinar. In case you missed it, the recording is posted. We were stunned by the amount of engagement from the audience; we allotted 30 minutes for questions and I think it went even longer. The webinar recording should be a great starting point for anyone... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Hey, team. Would it be possible to get premium access to LEED User while we're developing the best practices resources? (without subscribing to it- I don't LEED consult any longer)  Southface has basic membership, so I can't see what's available, etc. Thanks.

Hi all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

Our specification team is currently piloting and testing new software to replace E-specs without an easy favorite, and would really love to know what other firms are using.

First question - what software does your firm use for specifications and why?

Second question - would you/your specifier be willing to chat with ours about it... Read more