Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hi Everyone -

I just received this note from Don Horn at the GSA (Deputy Director, Office of Federal High-Performance Buildings):

"Here's another installment of our work to reduce emissions through GSA's actions. GSA issued a press release this morning announcing our new standards for low carbon concrete and environmentally... Read more

Dear Sustainability Leaders,

During this time of shifting our lives and work to online, BuildingGreen is working quickly to assess the challenges and opportunities regarding the remaining Peer Network Summits for 2020. As timelines continue to be extended for social distancing (and virtually connecting!), we are mapping out the... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Wondering if anyone has a contact for good [sustainable] interactive water feature designer? A client is looking for a designer to add to our team and I figured this network would certainly have some insights. Project will be located in Omaha, NE. 

Welcome to the quiz portion of Sustainable Sites: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1) Describe how invasive plants can harm an ecosystem, and why native plants are generally less work and less expensive.
2) Explain the... Read more

Hello everyone,

Over the past couple of years the Climate Smart Wood Group has met monthly to discuss all things related to the use of timber in building design and construction.  From forestry practices, to supply chain and sourcing information, to design experiences and examples, the group has operated as an open forum for advancing... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Greetings friends.

Many of you have heard about the CARE Tool, (formerly the 2Build or not 2Build Carbon Calculator.) We are now in the final stages of bringing it online as a free, open access tool hosted by Architecture 2030. We are finalizing and aligning data and working with a web developer (the same one that brought us... Read more

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Hello everyone,

So sorry that some of you couldn't get onto the call on Tuesday! There was a bit of a problem with our Zoom links. I think we've figured it out, so we should be all set next time.

Here are the notes from the call. If you have any questions about something on there, please feel free to post them here and we'll try... Read more

Jill is a licensed architect with WELL and Living Future accreditation. Through her experience leading sustainable achievement and verification on projects in the workplace, K-12, civic, and retail/mixed use typologies, Jill brings her passion for sustainable materials across vetting categories, AEC disciplines, bid scenarios, and market... Read more

Hey, all. Confirming the forum index on the front side of the pay wall will be searchable. Thanks.

Hello All,

ASHRAE and ICC released a draft standard for operational and embodied GHG evaluation.  It's on a fast track to be completed in time for the next code cycle.  This 30 day advisory draft includes dozens of questions looking for feedback from experts like all of you.  Please take a look and provide comments.  I've uploaded the... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more