Hi All, 

My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.  

Is anyone tracking this for job sites?... Read more

Does anyone know about temporary flushout equipment that could be used to augment a building's systems to get additional CFM of OA during construction?  For our non-laboratory type projects the flushout period ends up being too long, especially in either humid summers or frigid winters (Pennsylvania).

Hoping that some of you on either... Read more

Many of today’s surface coatings are either too toxic or lack durability and require too much maintenance to be viable choices for commercial or heavy residential use.

BuildingGreen-Approved Coatings

Products approved by BuildingGreen meet California’s South Coast Air Quality Management District’s strict VOC limits. They also:... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

The 2018 ENR Green Building Survey is due March 16th.  I'm sure you all know the metric they use to evaluate your ranking is solely the revenue from projects pursuing a green building certification in the previous calendar year.  Personally, I think this totally bogus.  How "green" a contractor is may correlate with how much revenue they have... Read more

Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more

Hi All -

I am looking for recommendations for a car charging station for a Catholic convent project we are working on. At this time, the client has requested either 2 charging stations or one station that can charge 2 vehicles. I've been researching chargers and am thinking that it does make sense to specify a commercial-grade charging... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

Returning to work: for many, it’s unthinkable without some kind of reassurance that leadership and the facilities team have taken all possible precautions. Lots of organizations are weighing in on what we should pay attention to, but how do we know if it’s working?

The free Re-entry program from Arc is a tracking and measurement... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

We are putting together a free guide for firms who have not yet started to figure out what their internal standards are for healthy, low carbon materials/products. 

As part of this effort, we are looking to gather from all of you who already have standards - examples and precedent.

Also we are collecting standards from clients/... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Hi Everyone,

Please mark your calendars for next Tuesday, March 17th, 2020 3pm ET (Noon PT) for an SCL webcast with Mark Chen at Skanska and Emi LaFountain at Turner Construction on Quantifying Jobsite Carbon Emissions. 

Description:

Quantifying Jobsite Carbon Emissions w/ Turner and Skanska
The focus of embodied... Read more

Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more