THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Hi Everyone!

I'm Emily, GCI General Contractor's Sustainability Manager in San Francisco. Nice to meet you all.

I started with the company in 2013 and since then we've doubled in employees. I have been handling sustainability solo, until about 8 months ago, when we hired Alejandra Arce Gomez full-time to help manage the... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

Dear Esteemed colleagues: I was recently asked a good question in light of the impending (fingers crossed) passage of the reconciliation bill that will bring alot of funding to energy efficiency/decarbonization upgrades at the residential scale. The question is: What are the arguments/ scenarios about the importance for homeowners to contract... Read more

Hi All,

Jacob Knowles from BR+A reached out with a request and I’m passing it on to you all.  Jacob’s contact info is at the bottom of this so you can respond to him directly or respond here and I’ll forward it on:

We are working on assembling examples of large wet lab buildings that employ strategies to greatly reduce fossil... Read more

This is a bit off the thread of sustainable design leadership, but how much design and/or leadership can you get done without an adequate amount of caffeination?

We are looking for recommendations and advice on improving the sustainability of our breakrooms, particularly on the subject of beverage (mostly coffee, but also a fair amount... Read more

Choose a photovoltaic (PV) system to fit your energy needs, budget, and the space you have for installing the modules.

BuildingGreen-Approved PV

BuildingGreen approves PV modules that have high warranted minimum power ratings and high PTC (PVUsa test conditions).

Building-integrated PV (BIPV) products approved by... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Greetings Gurus!! I'm super excited to invite you all to help each other :)

As many of you know, BuildingEase (a completely free tool!) has been born this year, the newest function we just launched is the Crowdsourcing function.

Crowdsourcing lets anyone contribute products to a public Material List (similar to an Outline Spec)... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

This summit was pre-approved for  6 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your information is... Read more

Hi all,

HOK has ~75 WELL APs whose credentials will expire in 6-12 months, so we're starting to look into a more robust CMP program.  Do you have great sources of health + wellbeing education, particularly WELL-specific CEUs, that you would recommend (emphasis on free or very low cost)?  We are currently using GBES, BuildingGreen, and... Read more