Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

I've been researching the job description for "Director of Sustainability" and Sustainability Director" as I'm at a point where Sustainability Specialist no longer seems to fit.  If you have either of these titles and are willing to share your job description with me, I'd appreciate it. I need to write my own job decription and I can write what... Read more

This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.

Two books immediately came to mind for me:

How Building Learn, by Stewart Brand

https://en.wikipedia.org/wiki/How_Buildings_Learn

It was many years ago but reading Stewart Brand’s How... Read more

For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?

In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more

Dear Colleagues,

I proposed CarbonCure for a project and the structural engineer in the meeting was opposed to it. He later sent me detailed reasoning by email. I have not used this technology and would like to hear other more experienced opinions on the technology. The project we are working on is well integrated with climate, 99% sDA,... Read more

BITuser Meeting:  5/23/18

Participants:  Shane, Andrea, Angela

Notes:

Southface to provide "style tiles" before 6/15 
Greg to send to Andrea, couple dozen images for Best Practice pages
Southface will send, in week to 10 days, "full content" for BP03 - Energy Audit 
(BP03 "full content" will address... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to... Read more

Many wood panels are unsustainably sourced, and some have high formaldehyde emissions.

BuildingGreen-Approved Panels

Laminate panels approved by BuildingGreen:

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Hi all,

The Healthy Building Network, now Habitable, was kind enough to develop printable versions of their Informed Product Guidance for us. I think these are a really great resource for design teams looking to select better product options. While the web version is great, we are using the printable version to hang select sheets around... Read more

I am putting together a presentation for our local AIA conference specifically about shading devices / dynamic glazing / dynamic shading and wonder whether any of you have experience / feedback from projects that used a dynamic system - exterior operable shading or dynamic glazing (like View, Sage).  Any post-construction / post occupancy... Read more

Happy new year everyone!

My name is Vandita Mudgal, I am the first ever 'Sustainability Engineer (district)' for Hensel Phelps N. California district (covers Nor Cal and Pacific NW). As mentioned, this is the first ever sustainability position at Hensel Phelps, therefore I am developing a lot of processes and systems for our district... Read more

I just saw this post from Conor on LinkedIn.

Starting in January 2019, all new Columbia Construction Company projects require LED temp lighting.

Are others doing this too? Frankly, given all the benefits and how quickly the industry is matured, it's hard for me to understand why anyone would use anything other than LEDs on a job.... Read more

Welcome to the quiz portion of Verifying Performance with Building Enclosure Commissioning.

Learning Objectives
Upon completing this course, participants will be able to:


1. Reason why the enclosure is fundamental to a sustainable building.
2. Explain why energy goals are less likely to be achieved without... Read more

Hi all, 

I'm looking for critical mass here. Do any of you have or know of clients who are requiring Just labeling for their consultants? I've heard that Google is asking this, and wondering who else might be on that course. Thanks!