Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

I see that the Architect 50 questions this year are organized around AIA 2030 Commitment reporting. I have a question about how people are answering them. The DDX reports have percentages that are by GSF. Are people using this percentage to answer the questions? Or are you calculating the percentage based on number of projects out of total... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more

Hello Peer Network members,

I have some bittersweet news: I’ve accepted another job and will be leaving BuildingGreen. I’m excited to be the new Community Outreach Manager at Brattleboro VT’s Retreat Farm and to support their mission of connecting people to the land and to each other. I’ve learned so much from being part of this... Read more

Many on this list teach or have strong contacts with university programs, so I'm hoping to leverage our network in service of something that may be of general benefit.

EDR has a Research Fellowship program where we host young talent for 3 or 12 months addressing new theme each year. The Fellow(s) get "academic freedom" and have no... Read more

All,

Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

Our firm is looking into our hiring process with JEDI objectives and looking for examples that have been successful. Just like any other firms, we utilize career fair opportunities from local Universities, we have scholarship & endowment programs for several institutions, which became a major pipeline. We are working on evaluating all... Read more

There are a number of SDL and other peer network folks talking about a potential casual meet up in association with Living Future 24 (next week in ATL).

In the interest of Julie McCoy-ing this thing into being ... 

Who: All y'all ... any Peer Network folks who are in town for LF24 (or local to ATL). 

Why: Connecting is... Read more

Hi All,

I wanted to pass on a few cool things we have going on at Built Environment Plus (formerly USGBC MA)  I really am conscious of not spamming you often and reserve posts for some of our most exciting happenings.

August 5, Building Tech Forum/MaterialsCAN: Getting to Zero with Embodied Carbon. Featuring 13 5-minute... Read more

Hi everyone,

We're hoping to do some building monitoring as part of Building Use Evaluations on our built work, starting with projects in East Africa, to ensure they are performing as intended and to keep supporting our partners. Ultimately we want to be able to log light, noise, temperature, humidity and CO2 concentration. This does not... Read more

Are you getting questions, advice, and dubious sales pitches from all comers about how to design and run an HVAC system to combat infectious disease? You’re not alone. Engineers, facility managers, architects, and other building professionals are all... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more