Hey, all. Confirming the forum index on the front side of the pay wall will be searchable. Thanks.

Welcome to the quiz portion of Video: Making the Green Insulation Choice for Your Project.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Explain why certain materials make more sense than others in particular applications.
3. Summarize... Read more

I'm looking to compile an outdoor weather station for a local project, and we'd like to add local outdoor CO2 information to our data. I usually work with Onset HOBO products, but they don't offer an outdoor CO2 sensor. Their weather stations can take data from any CO2 sensor with an analog output - does anyone have any suggestions?

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

Auto-quiz used for CEUs for attendees of the 2023 SDL Winter Summit.

Hello all, 

Any Fitwel experts out there? I have a 30,000 sf boutique hotel + spa client who would like to certify under the Fitwel rating system but Fitwel folks are telling me that no scorecard is currently available to hotel clients (can't use mulit-tenant or resi, that a hotel scorecard is under development). Has anyone used Fitwel... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hello,

We're trying to budget Fitwel Certification consulting fees for a non-profit client for whom we're designing an early childcare center in Louisville, KY. It would be for a single tenant new building Fitwel certification and include a Fitwel introduction workshop, working with design team, and coordinating/submitting documentation... Read more

Hi Fellow GG: I just wanted to make sure everyone saw the great announcement from the White House yesterday about Code updates to address energy efficiency and resilience. It's great to see these kinds of initiatives that hopefully can continue for a few more years. So let's try to take advantage of them (said by someone who lives in Missouri... Read more

Jerelyn Wilson’s work with BuildingGreen started in 1985 as an owner and member of the Board of Directors. Since then, her evolving roles have included HR Director, Outreach Director, and currently CEO. She is responsible for working with mid-sized to large architecture firms to implement sustainability education, as well as professional... Read more

Does anyone have an experience on recycling/reusing architectural glazing? We have a sizable glazing replacement project, and I am realizing how difficult it is to find a way to prevent the glazing from going into the landfill. So far, I have reached out to Terrazzo (aggregate) manufacturers, Glass Recycling Coalition, Architectural Glass... Read more

Hello AEC Sustainability Leaders (aka the Green Gurus)!

As we continue to promote and expand the use of mass timber on our projects, it is becoming increasingly important that we learn more about the spectrum of impacts that this material selection is having on the forests and communities from which we’re sourcing our wood fiber…both... Read more

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more

Hello Green Gurus,

We’re happy to see the first round of summit registrations rolling in! We’ve had lots of questions about specific topics for the sessions. As usual, the agenda will be based on topics that are top of mind for you.

Whether you are already registered or not, please fill out the Pre Summit-Palooza Survey to help us... Read more

Hey Sages, Just lobbing this over the transome - not sure if anyone else cares :) but this would be a great group to dig in if anyone IS interested.

 For the past few years, I've been working on melding two completely separate worlds - our world (with typical project delivery) and the world of Agile (not just software development process... Read more