The position for my replacement has been posted. Please share within your networks. Thanks!

http://www.fxcollaborative.com/profile/9/careers/

I received this email from Cathy Higgins at NBI, and thought some of you may know the right folks who might be interested:
---------------------
Hi colleagues,

You are exactly the folks that might know a high-caliber person to join NBI’s team. We are looking for someone ideally based in California but could be elsewhere with... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Commercial, institutional, and industrial buildings are the primary applications for large translucent wall and roof panels. Some products offer excellent energy performance while providing daylight into interior spaces.

BuildingGreen approved translucent panels

Due to concerns about BPA (bisphenol-A), BuildingGreen does... Read more

Hi Everyone.  Hope you and your families are all healthy and safe.

We are starting to figure out how we are going to implement the Contractors Commitment at my company, and we're using the opportunity to simultaneously set corporate wide and jobsite metrics and goals for sustainability tracking.

Each year we issue a sustainability... Read more

Hi everyone, on our SDL Regional Leaders call today we touched on how different offices are engaging with the Youth Climate Strike on Sept 20, and I offered to share a few resources that we've developed:  

1) Here is our public-facing official statement/endorsement: https://www.vmdo.com/architecture-blog/vmdo-youth-climate-strike/?fbclid... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Conventional stormwater management treats rain as the enemy—a dangerous and destructive force that must be deflected away from building sites as quickly as possible.

But as we pave more and more of paradise,... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

Welcome to the quiz portion of Sustainability Literacy: A Foundation For Transformed Practice!

Learning Objectives
Upon completing this course, participants will be able to:


Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Are there any metrics for % increase for building PH vs conventional?  These questions are always really hard- especially when there are none to compare to in area.

Friends,

As some of you know, I joined Perkins Eastman last year and it has been amazing. After years of being the Sustainable Design Leader at my last firm, this move has meant I can concentrate on project work because we have such an AMAZING team, led by Heather Jaurequi and Tanya Eagle. Unfortunately, that also means I'm not in the... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor?