Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

Hold the date. February 6, 1:00 pm Eastern.

You won't want to miss this conversation with Tim Ryder, the staff person from Senator Schumer’s office who helped lead the development of the IRA. Tim will share about the sausage-making that led to the mess of incentives we’re coming to know and… love(?) And he's interested in our ideas on... Read more

On Thursday, September 27 at 2PM Eastern Time you can join the first BuildingGreen Communities webinar where we will share key takeaways from the 11th annual Summer Sustainable Design Leaders Summit (@ the Garrison Institute in upstate New York). Our new webinar format using Zoom will allow for interactive questions and comments throughout. If... Read more

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

Conventional stormwater management treats rain as the enemy—a dangerous and destructive force that must be deflected away from building sites as quickly as possible.

But as we pave more and more of paradise,... Read more

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Hi everyone - in doing a carbon footprint for our firm, does anyone know if buildings that we design as Architects considered scope 3 emissions, or are they beyond the boundary of emissions? LMN's buildings, despite best efforts, are cumulatively multiple orders of magnitude above our scope 1 and 2 emissions. We have never included these... Read more

Hi all,

We know preparations for Greenbuild are well underway for many of you. We also know that there will be many things competing for your time while you're there. Here's one more to consider! We don't have all the details solidified yet, but wanted you to know sooner rather than later for planning purposes.

We hope you’ll... Read more

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

Hi, I've been following the copper piping discussion and am wondering if copper piping has been a problem in greywater systems.    We've used Aquatherm to some extent in greywater treatment.

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Does anyone have a "healthy material" exterior bleacher benchtop (beyond natural wood or metal) recommendation for a public high school track and field? 

How do we discern between fiberglass, recycled plastic or HPDE?  Is there a rule of thumb on how to advocate for specifying a "not as bad" material? 

The project is in a coastal... Read more

Dear SDL,

After almost 12 years at Sasaki, I have finally decided to leave for a path slightly-less-traveled. My own development project in Boston (passive house, ZNE condos) is in construction and I will be focusing my attention on that over the course of this year, and then hoping to continue doing similar integrated... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders