All,

I am on the Board of an Environmental organization in the Catskills (The Catskill Center for Conservation and Development https://catskillcenter.org/).  We are trying to develop a policy on siting of clean energy projects.  For example, we know of one town that bans PV's that can be seen from the road, another is a proposal to... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

I am looking for a healthy and safe mold preventative product to use on wood construction to prevent mold growth as this full wood building (truss, framing, exterior sheathing) will be exposed to moisture via the elements until the roof gets put on in earlywinter.

Please share your feedback, thus far we have found what looks like a lot... Read more

Hardware has to be durable and resist weathering to ensure that features such as doors function properly.

BuildingGreen-Approved Hardware

BuildingGreen approves hardware that uses post-consumer recycled metal content beyond what is standard in the industry. Products from manufacturers that have engaged in information transparency... Read more

Please mark your calendars to join BuildingGreen and HKS for the 2018 Pre-Greenbuild SDL Show & Tell on Tuesday, Nov. 13th, 2018 from 7pm - 9:30pm at HKS, 125 S Clark Street, Chicago, IL

We will be sending out a registration link next week. Space is limited. 

Thanks to Rand Ekman and all those at HKS for opening their doors... Read more

If you want to know more about the MEP 2040 Challenge, our first quarterly forum will be held on March 18th, 2022 11 am to 1 pm Eastern, and will be discussing decarbonization in the MEP space.  See link below for the agenda and registration.

https://network.carbonleadershipforum.org/civicrm/mailing/view?id=206&reset=1

I... Read more

Looking for 2-more flushometer style dual-flush flush valves to put in a public project spec alongside sloan uppercut and cannot seem to  find any.  Does anyone have any that they have used?

Thanks in advance!

Hi Everyone, 

As some of you know, I’ve been working on a new book, People, Planet, Design: A Practical Guide to Realizing Architecture's Potential and I’m happy to announce that it is finally available! 

This book grew out of a decade of thinking about how sustainability fits within architectural practice. It explores the reasons... Read more

Hello SCL, 

I have a slightly different ask than my usual Contractor's Commitment announcements.

Our newest writer, Elizabeth Waters, and I are researching for a BG article about construction emissions and jobsite carbon for BuildingGreen.com

In particular, we are trying to research how much of a building’s lifetime carbon... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED. Wednesday, February 7 at 2:00pm Eastern (11:00am Pacific)

You’ve probably heard that wood products are carbon neutral. You might also have heard that timber harvesting causes immense carbon emissions.

Which is it?

Could it be both?

... Read more

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Welcome to the quiz portion of Designing for the Next Century's Weather

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Understand how to adjust building designs to rising temperatures and humidity.
2. Recognize how climate-responsive buildings may not respond as expected in... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

Hi:

I encourage you to review and sign this letter. 

Notes from BDC follow:

Really appreciate the outpouring of support we've received so far on this letter! Various groups let us know that they would like additional time to review, so we've decided to extend the deadline from June 23 to Thursday, July 14 at 2pm.

As... Read more

Hello- If you use Procore....

Are your jobs using a template to conduct and create "reports" of their IAQ inspections? Did you set it up in forms or inspections? Would you mind sharing an example template with me? I know Green Badger has a great app to do this, which we use. We would use inspections in Procore for jobs that are not using... Read more

We are no longer accepting reservations for the SDL Summer Summit 2020.