High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Meet the winners:

2024
2023
2022
2021

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

The COTE Toolkit just launched on AIA.org's site, please go and check it out and share with your networks. The project spanned over the last year+ with over 40 authors, subject matter experts, and reviewers contributing to the process, (including many Green Gurus!)

With the goal of closing the information gap to designing high... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi there SD Leaders,

We're running an LCA on one of our projects that's about to start construction that has had serious embodied carbon goals and I got a result that really surprised me. I haven't been able to find any obvious/glaring issues with the work, but these results are strange enough that I'm not feeling confident. I'm hoping... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

Hi everyone! I'm extremely pleased to be back in this group after a couple of years out and I'll spare no time in spamming your inboxes. 

MASS is working with UT Austin to help them evaluate their campus buildings for reuse firstly and then deconstruction and material reuse. Their campus, as with most campuses, is constantly being built... Read more

Have any of you relied on Green Badger for LEED documentation on projects?

I am familiar with the tool and know Tommy from my time in Atlanta, but have not used it on a construction project.

Have you found value? Thoughts?

Either way, they publish a pretty nifty "LEED v4 Construction Tool Kit" that may be useful for your... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi all,

HOK has ~75 WELL APs whose credentials will expire in 6-12 months, so we're starting to look into a more robust CMP program.  Do you have great sources of health + wellbeing education, particularly WELL-specific CEUs, that you would recommend (emphasis on free or very low cost)?  We are currently using GBES, BuildingGreen, and... Read more