Hi Everyone -

I just received this note from Don Horn at the GSA (Deputy Director, Office of Federal High-Performance Buildings):

"Here's another installment of our work to reduce emissions through GSA's actions. GSA issued a press release this morning announcing our new standards for low carbon concrete and environmentally... Read more

Save the Date: If you'll be in DC for AIA's Conference on Architecture or just happen to live nearby, hold 6:00–8:30 pm on Wednesday, June 5 for this event.

We have partners! This event will be hosted by ZGF Architects (on their lovely rooftop patio) in collaboration with US Architects... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Welcome to the quiz portion of How to Spot Greenwash--A BuildingGreen Webinar.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the characteristics of quality standards and certifications to help screen out greenwash.
2. Recognize strengths and weaknesses of... Read more

Hi SAL friends,

As some of you have heard by now, we've decided to shut down this Peer Network.

After several years of trying, we have not managed to activate it as we had hoped. Given the urgency of the collective action we need to transform the building industry into a force for good in the world, we all need to focus our... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Hi All,

My team member is leaving Webcor, and unfortunately that means we have to fill her big shoes with someone new! I thought I'd reachout here and see if you know anyone of high caliber looking for a Sustainability Manager position? Someone with LEED PM experience preferred, and a bit more technical background with MEP/ZNE ideally... Read more

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

Welcome to the quiz portion of Downscaled Climate Data: Where to Get It and How to Use It.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Define “downscaled climate data” and understand where to find it and how to apply it in modeling to achieve greater environmental sustainability and... Read more

My name is Douglas Flandro. I am the sustainable design leader at CambridgeSeven in Cambridge, MA. I started my career in film and theater design. I moved into museum exhibit design with a graduate degree in interior architecture at the Rhode Island School of Design in 2003. I still design museum exhibits for science museums, nature visitor... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Standard spray polyurethane foam (SPF) insulation is made using blowing agents with extremely high global warming potential (GWP), which can cancel out much of the potential energy savings from use over its life... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Figured I'd throw out this topic to the hive mind!

We are working on a project in the Midwest that involves taking down and replacing an 100-ish-year-old brick building. We are hoping to find a way to salvage and reuse some of this brick in new construction. I'd love to do an LCA comparison showing the benefits of salvaging the brick vs... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Hello there, 

I am working on a project with indoor plants and active green walls. I would like to design lights for growing plants and people at the same time (which seems to be a non-obvious problem). 
 

I was thinking of Philips, GE, Shneider Lighting, etc. Would you recommend someone I could talk to and eventually engage... Read more