The sheer number of building product certifications and labels is overwhelming, and even those experienced with green labels can get exhausted trying to figure out which are relevant and which aren’t.

The confusion in the market over green labels can complicate efforts of both manufacturers and design professionals... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

We had these conversations grouped by size of firm. 

Guiding Questions:

Knowledge Management By Firm Size

How to give people the info they need, when they need it?

Is the COTE Top Ten a good framework?

This seems extremely daunting in a large firm. How do we manage content that is produced and shared... Read more

Does anyone know of studies that measure for any correlation between the prevalence of collaborative people in leadership positions with financial (or other) success for firms/organizations?

There have been well-publicized studies on how companies with women in leadership positions, and companies with more diversity, do better. (... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Hi everyone,

Have your projects explored, pursued, or successfully achieved the domestic content bonus for PV systems within the Inflation Reduction Act (IRA) Investment Tax Credit? I have a project that is considering adding the IRA domestic content requirements and we are trying to understand the nuances and potential challenges (cost... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

Welcome to the quiz portion of The Sound of Sustainability: Acoustics in High-Performance Design!

Learning Objectives
Upon completing this course, participants will be able to:


Describe how increased acoustic performance benefits indoor environmental quality (IEQ).

Recount the negative impacts of poor acoustic... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Nadav Malin is a passionate facilitator, leading workshops and retreats to help organizations of all types find alignment, inspiration, and leadership in pursuit of their goals. He convenes peer networks of architecture firm Sustainable Design Leaders, Sustainable Construction Leaders, and others. He facilitates gatherings and consults to USGBC... Read more

Based on current projects, pursuits, and ongoing thought leadership, the following are hot topics across the Stantec Buildings group.

Read on to stay up to date with evolving skills and expertise not only in your own BC but also... Read more