Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

The LBC v4.0 materials imperatives for Responsible Materials (Core) & Responsible Sourcing require a majority of wood materials (by cost) to be FSC. Sure. But what is - or isn't - considered wood? The Clarification page for the imperative's scope and a key definition poses a perplexing conundrum: 

"All wood included in the Materials... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

Hello good people and fabulous troublemakers,

PFAS is in everything. In May, the NY Times published an article about this, along with the governments work to remove it from drinking water. https://www.nytimes.com/2024/04/10/climate/six-things-to-know-about-forever-chemicals.html

As you may know, a working group has been gathering... Read more

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

The AIA conference is coming up soon as well.  It is scheduled for June 19-23 in NYC. I have heard about a lot of great sessions and I am thinking it would be helpful if we could collect info here.  Please respond to this message with info about your session and I will compile all of this into a handy reference document.  I will start with my... Read more

Hi! Over the last 10 years, the firm where I work in Boston has predominately designed housing & senior living projects in the the Boston Metro region, with the occassional project in NH, CT, RI, and NY. We have built projects as far south at DC, but never designed anything to my knowledge in California in our 55 years of operation. A... Read more

Hi all, 

Thank you again to those of you who attended the Spring 2024 SCL Summit! We had an amazing day of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all of the... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more

What is your favorite, tangible example of an EUI?

I find it easy for individuals to undervalue the power of a single EUI and curious what useful parallel the creative folks in this forum have used to illiterate its compounding value?

Cheers!
DiAnn

Hi! Quinn Evans is looking for a great candidate for a new position that focuses on design performance analysis. We're looking for someone with 5+ years experience in the AE industry and knowledge of performance tools and software that inform design decisions related to energy, carbon, and daylight. The position can be based in any of our... Read more

Hi All,

I have a commercial restauranter in Colorado who is (reluctantly) considering induction cooking. Does anyone know of any good resources out there that can help make the case for this? That would include testimonials, research, videos, testimonials, or whatever else can help get a commercial kitchen comfortable to moving to... Read more