Welcome to 2030 reporting season!

I brought up on the Fika today that there is a webinar December 5th to show updates to the DDx including the calculation of operational carbon from your energy data.  Below is a link to register.

https://aia.zoom.us/meeting/register/tZUocOutrTItHtWiySNMIqfGYv4ZbAhtjSg...

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Though BuildingGreen has long supported the use of electric hand dryers as a more environmentally friendly hand drying option, the majority of evidence appears to support paper towels as a preferred method of controlling the spread of potential pathogens. 

And even the most efficient hand dryers contribute significant CO2 to the... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

Hello SDL friends,

It has been an amazing opportunity to collaborate with so many of you through this group or through my work with Tally, the USGBC, ILFI, and in my role as an environmental researcher at KieranTimberlake. This is not so much a goodbye as it is a "hope to see you soon." I am making a shift away from building design into... Read more

Welcome to the quiz portion of LEED 2009: The Missing Manual.

Learning Objectives
Upon completing this course, participants will be able to:


1. Stay abreast of changes to LEED NC-2009.
2. Understand the more ambiguous aspects of LEED NC-2009.
3. Explain key interpretations of LEED NC-2009.
4.... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Cher Hiblthren

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Hello, All!

Looking for some quick insight from the braintrust into how to best approach project goal-setting.

We’ve been taking a critical look at goal-setting practices to better understand what drives the gap between projects that meet ambitious high-performance targets and those that don’t. Recognizing that goal setting is a... Read more

I wanted to share some thoughts from Brenda Stanfield about the Design for Freedom conference and the work that she is doing to fight the difficult problem of forced and child labor in construction materials.I feel like it is a step up from the LEED social justice pilot credits, which are a great start. Hopefully it helps you in your work. I am... Read more