...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

All, today is the day I had committed to sending out the DRAFT request to equipment manufacturers of what is needed for full electrification.  I apologize that I didn't have time or focus to get my thoughts together till now (I had intended to share this with Chris and others prior to sending to the full group, but just didn't get my thoughts... Read more

Welcome to the quiz portion of Counting Carbon: Understanding Carbon Footprints of Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate carbon counting approaches based on regulation or monetization from approaches aiming just to reduce carbon emissions.
2... Read more

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more

July 29-31, 2020
Chicago, Illinois

Learn more and register

Tuesday, Mar. 17, 11am EDT

Tuesday... Read more

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

Hi folks,

I wanted to let people know about this webinar--I've heard it's good. If you do catch it please let us know what you think. Jason has offered to do a private version for our Peer Networks as well--I'd love to know how interested people would be in that opportunity.

November 14, 2019 from noon to 1 PM Pacific Time

... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Upon completion of this course, participants will be able to:

Be aware of key dates in the history of the LEED rating system.

Have a clear understanding of the new impact areas present in the updated rating system.

Ascertain which types of new credits belong to which impact areas in the LEED v5 rating system.

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more