Hi Everyone, 

This is quite last minute (due tonight) but please see below for an opportunity to email comments to EPA supporting national building material reuse measurement/methodology. Submission is easy, just a short email supporting C&D/reuse and any other thoughts on what to include/exclude in material pathways for reuse beyond... Read more

B-Boy Newsy

Section 901.5.1.3 of the 2018 IgCC includes a requirement that "A critical review shall be performed by an external expert independent of those performing the LCA."  I'm curious as to what other's experiences are with having an external expert review an LCA - how does one find such an expert?  Do you have any favorites that you'd recommend? ... Read more

Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more

Hey all,

Thanks to everyone who joined today's peer network webinar - it was great to share what our working group has been developing in the last year. This group gathered to work through a series of decision-making trees to publish some kind of relatively repeatable guidance for how to advance this conversation with a variety of owners... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Hello! 

We have several projects that are either pending ILFI Zero Carbon certification or the owner is planning to purchase offsets to cover construction emissions. Thus far, I have not considered this in our corporate footprint reporting. However, we are including A5 emissions whenever feasible and multiplying that performance over the... Read more

Welcome to the quiz portion of Whole-Building Life-Cycle Assessment: Taking the Measure of a Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define key concepts of whole-building LCA.
2. Recognize the inherent flaws, and potential gains, of whole-building LCA... Read more

Welcome to the quiz portion of Building Re-Entry with Arc

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the similarities and differences between LEED v4.1 O+M performance metrics and the Arc Re-Entry program.

2.  Understand how Arc Re-Entry contributes to an iterative re-... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hi All, I was initially reluctant to share this, but I've seen similar posts and I think it's in line with our mission and interests so I'll go ahead with it.

Tomorrow 12/9 at 1 PM EST I'm moderating a panel of industry leaders in public health (as it pertains to buildings), construction finance, and project development to review the... Read more

Hello Sustainable Construction Leaders,

It's come to our attention that although we shared the slides from last fall's all-network Show & Tell in Atlanta, we neglected to include the presentations from the SCL Summit itself. Since we believe in "better late than never," here they are!

As a reminder: we have permission from... Read more