Does anyone have a Passive House detailing resource recommendation? Something that is applicable to wood over podium and/or metal framing construction? I have the book below but looking for something more applicable.

Passive House Details: Solutions for High-Performance Design 1st Edition

by Donald B. Corner (Author), Jan C.... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

People tracking pollutants and dirt into buildings can cause indoor environmental quality (IEQ) problems, increase maintenance costs, and reduce the life of the floor. When they track rain and snow on hard surfaces, it increases the risk of personal injury due to slips and falls.

BuildingGreen-Approved Track-Off Systems

... Read more

Nadav Malin is a passionate facilitator, leading workshops and retreats to help organizations of all types find alignment, inspiration, and leadership in pursuit of their goals. He convenes peer networks of architecture firm Sustainable Design Leaders, Sustainable Construction Leaders, and others. He facilitates gatherings and consults to USGBC... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Welcome to the quiz portion of Designing for Future Weather (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the science of climate-change predictions.
2. Stay abreast of changing climate models.
3. Learn how to make use of future weather... Read more

Huge congratulations to everyone involved with a Top Ten winner this year! 

In a rare feat--Leddy Maytum Stacy got two!

Also P+W, Lake|Flato with Cooper Cary, WRNS, SOM, Olsen Kundig, KieranTimberlake, DLR--nice work! (And who is Studio27?)

Here's James Wilson's take on what's special about each winning project.

... Read more

For consideration in determining CM "Greenness", are we leaders if we wait for city ordinances?  can we collectively agree/adopt a standard?

and for those of you in this market, how is this being received and implemented?

https://www.portlandoregon.gov/bps/article/701085

Multnomah County, City of Portland commit to reducing... Read more

Mark oversees strategic marketing and product development for BuildingGreen. In this role, he works closely with our Editorial, WebDev, and Consulting teams to conceive, plan, direct, and budget integrated marketing programs that support our outreach and meet customers’ needs. 

Joining BuildingGreen in late 2021, Mark brings... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Gather with the Changemakers in Sustainable Design

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll explore what Sustainability Leadership looks like in 2023 and... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Welcome to the quiz portion of Improving Resilience!

IMPORTANT: This quiz covers five related articles within this topic. 

Learning Objectives
Upon completing this course, participants will be able to:


We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project.  However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.).  This approach is... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

reposting Arathi Gowda -

https://communityhub.aia.org/blogs/arathi-p-gowda-aia/2024/12/17/cote-ad...

The Advocacy team (part of the AIA COTE leadership group) would like to amplify actions the USGBC has gathered to defend the IRA. As you may know, the IRA is a bipartisan bill with 63,000 infrastructure projects starting nationwide... Read more

I've written waste and recycling policies many a time before for both construciton and operations... but in a volunteer committee application this morning, the maintenance team got bogged down on "how do we collect recycling without plastic bags" question. I told them there's not any kind of plastic bag that I'm aware of which can be thrown... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more