Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Hi all,

Are you looking for a senior level sustainable design position in Canada?  We’re hiring a sustainable design leader and senior sustainable design consultant with location options in Vancouver, Toronto, Edmonton, Calgary or remote (Canada only). https://dialogdesign.ca/careers/current-openings/

I joined DIALOG 10 months ago... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Curious if folks know of any resources on hempcrete, specific to durability.  We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?

In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more

I'm looking to draft some one-page briefs for my consulting engineers to outline what we would like to see in their specs regarding certain materials and systems. For example, letting the plumbing and civil engineers know that we prefer to eliminate PVC pipe and want them to specify alternatives like Polypropylene, cast iron, ABS, etc. The idea... Read more

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

Hey there hive mind,

Anyone have any CxAs in the Bay Area that they'd particularly recommend? I have a project in need.

Aley

I'm working on the Best Practice pages, and I want to verify the role of "BITuser experts" (analogous to LEEDuser experts, as shown on this credit page). My questions:

Note that the role of the expert,... Read more