All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

On our Contractor Coffee talk a few weeks ago, Emi LaFountain (Turner Construction) brought up the idea that there was a lot of blue stain wood that are being landfilled instead of used, and suggested that maybe the designers among us could find a way to turn ugly into beautiful.

I had never heard of this issue, but I was on a call the... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

It’s Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early. Plus, we can share them across all the... Read more

If you’ll be attending AIA24 (or if you live in the D.C. area), join us for the BuildingGreen Show & Tell on June 5th from 6:00-8:30pm at ZGF! This will be a free joint reception with members of US Architects Declare, and it’s open to all Peer Network members. Light refreshments and beverages will be served.

Here is the link to... Read more

Hi folks,

We had a rich conversation in our monthly meeting last week. I've summarized the highlights below. Next call is July 11 at 2pm eastern. If it isn't already in your calendar, here's the Zoom link.

What’s on people’s minds?

Looking into high-temp water-source heat pumps for industrial applications. Transom and... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Hi all, 

Following the SCL Summit back in November, the Waste Subgroup agreed to complete a Model Waste Management Plan to serve as a contractor commitment to reduce construction waste. I distributed the attached (very rough) draft back in Jan., and received some good feedback via forum comments. 

We would like to set up a call to... Read more

Welcome to the quiz portion of The Hidden Science of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define hygrothermal pressure and explain what it requires of water, air, and thermal barriers in high-performance assemblies.
2. Explain... Read more

For those folks who are on our retrofit electrfication roadmap post-palooza-sub-sub-working group ;-) , I thought you might be interested in these three guides just released from BEI in collaboration with S. Winter Associates.

Here are the three Playbooks:

Dennis,

I was wondering if you have any previous experience implementing SSO authentication with Salesforce before and if you had any pointers. This morning I created a developer account on Salesforce and enabled it as an identity provider and am in the process of trying to get Drupal to act as the service provider. The Salesforce... Read more

Upon completion of this course, participants will be able to:

Be aware of key dates in the history of the LEED rating system.

Have a clear understanding of the new impact areas present in the updated rating system.

Ascertain which types of new credits belong to which impact areas in the LEED v5 rating system.

Does anyone have any comparative analysis/reviews of the various energy modeling protocols that includes the 'new' Trane TRACE interface?

Thanks!

Robert Phinney

rphinney@pagethink.com

Hi all,

We are hiring for a Sustainability manager position in Northern California. Webcor is a GC firm, headquartered in SF with offices in Los Angeles, San Diego and San Jose.

This is a flagship opportunity to align with a large tech clients innovative sustainability goal in downtown San Jose, and act as the sustainability... Read more