All,

I think there may be more than a few people interested in an article I co-authored titled Comparative whole building life cycle assessment of renovation and new construction. It is now available in the journal Building and Environment. Fortunately we have a link that gets you past the paywall that is good for 50 days. If you have... Read more

As with window and glazing products, the energy performance of skylights and roof windows varies greatly among different products and should be carefully considered.

BuildingGreen-Approved Skylights

BuildingGreen approves products that feature advanced thermally broken frames that dramatically reduce thermal bridging and improve... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to issue our special report, Spec This, Not That.

In updating the report in 2020, we engaged a respected toxicology and regulatory-compliance firm to review and assist in our revision of the entire publication. This edition reflects the latest science in... Read more

Dear SD Leaders: The comment period closes January 31st on  NCA Volume II Climate Change Impacts, Risks, and Adaptation in the United States.

It's important to have the design communities perspective on these critical issues. I hope you can take a look and submit your comments before the deadline.

Details here: https://www.... Read more

Dear Colleagues: A climate scientist family member who I respect deeply shared this youtube with me. I thought it was worth sharing with all of my GreenGuru friends. Let's keep on keeping on!

https://www.youtube.com/watch?v=LxgMdjyw8uw

cheers

Mary Ann

Welcome to the quiz portion of The Product Transparency Movement: Peeking Behind the Corporate Veil.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe an EPD, naming at least six characteristics that it attempts to quantify.
2. Explain what the HPD Open Standard... Read more

Greetings,

I'm looking for recommendations from this esteemed group for 3rd-party vendors/verifiers of GHG emissions to support our CSR initiatives. We currently have a provider, but our company has grown to the point to where we need to transition from "analaog" reporting (location by location) to a higher level of service offering (... Read more

RoseAnn Grimes

Has anyone found any options to recycle safety vests, or discovered an upcycling option for them?  We are about to replace all of our vests company-wide and will have thousands that we don't want in the waste stream and we don't want to be reused as safety vests.  Any thoughts or ideas would be great!

Thanks and I hope everyone is... Read more

Hi all, 

You all know how much the Living Building Challenge and other ILFI programs have transformed the aspirations of our industry, right? This year ILFI has the privilege of being included in Washington's GiveBig campaign! For the next two days, you can help bring attention to the site, raise support and draw people to the page where... Read more

Hello, All!  We haven't run WBLCA on a project that may include electrochromic glazing before, and it's embodied carbon footprint is really high in comparison to a more traditional double or triple pane IGU (we thought it would be higher, but this is 3-4x higher).  The EPD we have from Sage Glass for their triple pane electrochromic lists a GWP... Read more

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

Welcome to the quiz portion of Introducing Fitwel v2.1!

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the purpose of the Fitwel standard, including how it advances the goals of health and well-being of building occupants—as well as public health.

2. List nine ways in... Read more

Good Morning everyone.  i just wanted to send Congratulations out to the new class of fellows, with a shout out to Jonathan Weiss, Paul Hutton, and Ramana Koti.

Well done Gentleman!

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more