Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

We are hiring! Please share with any potential talented and passionate candidates.

https://archinect.com/jobs/entry/150052970/sustainable-design-specialist

ps. And, yes we recently rebranded for our 40th anniversary for those who may be confused :) 

Greetings friends.  Our leadership has decided to create a partner-position to my role but in the engineering group of our firm.  This person would be a key ally in my work improving the high performance and sustainability of our projects with a focus on high-performance mechanical systems, net-zero, electrification, etc...  If you are... Read more

Greetings, Green Gurus!  As many of you know, I teach a course at the University of Pennsylvania's Graduate School of Architecture, and one of my former students has just graduated from their and MS in Design - Environmental Building Design program.  She is looking for employment at a firm that has a focus on sustainability.  Unfortunately we... Read more

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more

There are so many great contractor-related sessions at Greenbuild this year! I doubt I'm alone in trying to choose between sessions.  

Is there interest in debriefing with SCLers the week after (say Novemeber 9th at 2pm ET?). We could share the golden nuggets from the sessions we attended, saving everyone from wading through the session... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Good morning SALs! Nicole's survey on restrooms inspired me to post a survey of my own.

I’ve been trying to stay useful lately. I've been posting new writing on the industry, much of it complimentary, over on Roberts’ Green Letter. (Yesterday I posted the mission statement, explained via brand-new-puppy pics.)

I have a 1-minute... Read more

SDL Show & Tell in Chicago, Tuesday, November 13 from 7-9:30 PM (CST)
HKS | 125 S Clark Street | Chicago, IL 60603

What better way to kick off your time at Greenbuild than with snap previews of the best sessions? The Sustainable Design Leaders Show & Tell is back, brought to you by BuildingGreen and HKS! This event is by... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Hey everyone,

This is a quick note to say I am retiring at the end of this month and will be taking a hiatus from the SDL group. I will no longer be practicing architecture, but I will remain active in efforts to preserve the wonders of this world for future generations.   

To all my SDL sisters and brothers (I don't always sound... Read more