BuildingGreen Report

News Brief

July 1, 1992

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Explainer

July 1, 1992
Wet-spray Cellulose

While dry cellulose in curtain-truss cavities provides a very attractive system environmentally, there are other—more common—ways of using cellulose insulation in walls. In new construction, the most common is wet-spray installation, in which cellulose is mixed with water and (often) an acrylic binder and sprayed into... Read more

Product Review

July 1, 1992
Formaldehyde-free Interior-grade MDF

Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

Op-Ed

Introducing the first issue of our newsletter.

July 1, 1992
Welcome to Environmental Building News

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Feature

Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.

July 1, 1992

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

News Brief

July 1, 1992

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Feature

July 1, 1992

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Feature

Susan Maxman is the first AIA president to make sustainable design a priority. 

July 1, 1992
Interview with Susan Maxman, President, AIA 20 June 1992

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Forum topic

Healthcare Design, one of the most respected and widely recognized trade journals in the health care AEC space has released the names of its 2022 HCD 10 winners.  The mission of The HCD 10 is to recognize and celebrate the broad spectrum of outstanding professionals in that industry and the influence they have on healthcare design.

One... Read more

Author

Shamus Gumshoe

Reports, Courses, Study Guides, Live Webinars

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

Forum topic

Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

Forum topic

Hello everyone!

My role at Sundt Construction is both a Preconstruction Project Manager, and Chairman of the company's sustainability committee. I've been involved in green building since 2001 and have been in leadership roles in both the Arizona and Minnesota USGBC Chapters. I look forward to being an active member of this group.... Read more

Forum topic

Hi: Is anyone individually or at a firm level offsetting their travel through Certified Emissions Reduction (CER) or Verified Emissions Reduction (VER) credits? I'm trying to research a valid approach to doing this and running into a few different options - some even with apps. I'd appreciate any wisdom from this great group.

Thanks.... Read more

Forum topic

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Forum topic

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

Forum topic

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

Forum topic

Hi, folks! Posting on behalf of an individual outside of the networks. Are you seeking a sustainability and materials specialist in-house? This candidate great qualifications, including:

LBC Materials Petal vetting experience – check! tallyCAT – check! Experience training teams on rating systems and internal organziation goals – check!... Read more

Quiz

Welcome to the quiz portion of Cool Products from the Latest Greenbuild Expo.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Describe innovative products for HVAC and the building envelope.
2. Describe innovative products for saving water and managing stormwater.
3.... Read more