Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

All, today is the day I had committed to sending out the DRAFT request to equipment manufacturers of what is needed for full electrification.  I apologize that I didn't have time or focus to get my thoughts together till now (I had intended to share this with Chris and others prior to sending to the full group, but just didn't get my thoughts... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Welcome to the quiz portion of BuildingGreen’s Top 10 Green Building Products for 2018.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the transparency and optimization criteria in the LEED v4 (applicable to  Building Product Disclosure and Optimization credits in LEED v4 BD+C and... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more

Hi folks,

We're currently scoping out a BuildingGreen report on how the global market for recycled/recyclable materials has changed over the years, and what that means for waste management practices in construction, and for the availability of recycled content materials. 

This ties into the goal from the SCL Summit about LEED... Read more

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

Hi SDLers,

We’re really looking forward to connecting with many of you in a few weeks for the Summer Summit. Those of you who have registered are now actively helping to set the agenda--as always, it will be filled with rich conversations and connections.

For a range of reasons--new patterns due to the pandemic, the economy, your... Read more