Forum topic
Hi all,
We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more
Forum topic
We are putting together a free guide for firms who have not yet started to figure out what their internal standards are for healthy, low carbon materials/products.
As part of this effort, we are looking to gather from all of you who already have standards - examples and precedent.
Also we are collecting standards from clients/... Read more
Forum topic
The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong. We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more
Forum topic
Hi folks,
Some of you have seen me do a 5-minute presentation on an initiative to divert urine from wastewater. That team is now developing a building-scale urine treatment technology with support from the National Science Foundation's Small Business Innovative Research (SBIR) award.
In order to learn more about the sustainable... Read more
Forum topic
Our specification team is currently piloting and testing new software to replace E-specs without an easy favorite, and would really love to know what other firms are using.
First question - what software does your firm use for specifications and why?
Second question - would you/your specifier be willing to chat with ours about it... Read more
Quiz
Welcome to the quiz portion of Behind the Logos: Understanding Green Product Certifications.
Learning Objectives
Upon completing this course, participants will be able to:
Explain certification basics: standard development, the degree of separation between the certifier and the company whose product is being certified, and... Read moreForum topic
Has anyone done inherent bias training in their firm, and if so, how'd it go? Do you have someone you'd recommend as a trainer/facilitator? Thanks!
Forum topic
Hi All,
I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.
_Ilana
Forum topic
Hello SCL peeps,
Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit.
To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more
Product Guide
Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.
BuildingGreen-Approved Windows
Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.
Manufacturers also must demonstrate that their highest-... Read more
Forum topic
Hey there Hive Mind,
I'm tossing a question out here as I know various compositions of us have had pieces of this conversation about how operational and embodied decarbonization has been incentivizes at state and local levels through various regulatory frameworks. I meant to do research on this topic for a project team of mine and time... Read more
Forum topic
Greetings all, and welcome to all those who already introduced themselves! My name is Steven Burke and I am a Sustainability Manager at Consigli Construction in Massachusetts. We are East Coast only, but we have a few offices from DC up to Maine. I’ve been helping Jenn and Nadav get this group up and running, and I’m relatively new to the... Read more
Forum topic
Hey Gurus. Might anyone have experience, or thoughts, with regard to establishing an energy use baseline for a new advanced manufacturing facility we are working on for a regional technical community college? This type of academic facility is so relatively new, the program doesn't fall into the typical "College/University" building type from ... Read more
Spotlight Report
Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more
Forum topic
Hi Green Gurus: check out this new series from AIAU that delves into the design and planning application of the 4th National Climate Assessment Report by region with some more recent updates. Free to members...looks like some great speakers and highly relevant.
https://aiau.aia.org/regional-tour-climate-risk-planning-and-design
... Read more
Forum topic
Dear All,
Greetings. On this Earth Day, I hope you're enjoying our planet's gifts and also giving your gift with reckless abandon.
As I take a short break to plan what I want to do next, this coming Friday, April 26, will be my last day at HKS. Maybe I will get a Hitchhiker's Guide to the Galaxy tattoo like Paula.
I... Read more
Forum topic
Team,
Many of you saw the BlackRock letter.
https://www.blackrock.com/corporate/investor-relations/larry-fink-ceo-letter
Should we hold our consultants and suppliers accountable for climate change?
Best,
LL