Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

RoseAnn Grimes

Hi folks,

It came up on the Regional Leaders call this week that many people aren't aware that we added a link to the BuildingGreen Communities in footer of BuildingGreen.com. So if you want an easy way to get to the forum page, other than clicking on a link in an email, there it is! (Thank you, Stephen Endy!)

The footer has a... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

As many of you may already be aware, Greenbuild 2020 is scheduled for the week of the Presidential Election, Nov. 3rd, 2020. 

The partners organizing Greenbuild 2020 are USGSBC and Informa Exhibitions. If you have concerns regarding Greenbuild happening during that week, you may want to consider reaching out to whoever you have contact... Read more

The headlines are everywhere—from heat waves in Europe to wildfires in the Western U.S. to tropical cyclone flooding in Australia. In this age of climate change, just as there’s an urgent need to reduce carbon emissions and other greenhouse gasses, we also need to adapt and invest in resilience.

Increasingly, owners are asking for risk... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Small Firm Sustainable Design Leaders –

I find it hard to believe calls for session proposals are already out for next year’s AIA Conference on Architecture.  I feel like I just got back!

At my firm, we try to have all principals and associates to submit a proposal each year.  I had a couple of take-aways from this year’s... Read more

Welcome to the quiz portion of Designing Natural Ventilation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how natural venting and cooling potentials are realized in buildings.
2. Show how natural ventilation and passive cooling strategies can amount to increased... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

I had a client ask recently if there is a 'better' global social justice tool than ILFI's JUST for use outside the U.S. 

Personally, I'd look to WELLv2 feature C12 - Organizational Transparency for other options... but personally have very limited knowledge of options c-e.

Do folks have an opinion on if any of these prograams are... Read more

Hello, 

We are becoming involved with the design/construction of a new k-12 school that is intersted in entertaining geothermal. Does anyone have payback studies on geothermal?

Thanks!

https://www.usgbc.org/articles/us-green-building-council-celebrates-2021-class-leed-fellows

I'm sure you will see many familar names on the list - not the least of which is our fellow SMEPL:  Sarah Gudeman.

Congratulations, Sarah - well done!