Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project.  However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.).  This approach is... Read more

Hello Everyone,

Here are some of the Show & Tell presentations from the 2019 SDL Winter Summit, enjoy!!

Best,

RoseAnn

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Hello friends,

Here’s another upcoming event that BuildingGreen has been hiding up our sleeve: a San Francisco Bay Area Mini-Summit! A summary is below, see the registration page for more details or to sign up. This event is intended for SF locals, so folks who work farther afield can join, with the knowledge that Bay Area-specific... Read more

Hello Sustainability Leaders,

I am writing with some news from the Peer Networks team. 

I recently accepted a job with a local college I have long admired in their advancement office. Therefore, my last day at BuildingGreen will be Fri. Feb. 11th. 

Working with you all these past four and a half years has been such an... Read more

Does anyone have a good recommendation for getting started with energy modeling with future weather files? We use a combination of Sefaira and Climate Studio, but open to suggestions. Even just links on how to approach this for making good recommendations to clients. Thanks in advance.

Hello SCL, 

If you didn't attend last week's SCL Summit, then I'll sum up one of the major takeaways: SCL members NEED TO COMMENT ON LEEDV5. The stakes are high, particularly around waste. 

Luckily, Amanda Kaminsky is making it easy for us. She has drafted a sample comment based on our discussion at the Summit. 

If you have... Read more

Welcome to the quiz portion of Existing Buildings Are Architecture’s Future!

Learning Objectives
Upon completing this course, participants will be able to:


Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

Dear Colleagues:

This is a request from AIA COTE Advocacy to sign another petition on behalf of your firm. I know it's incomprehensible that we have to do this, but we at AIA COTE Advocacy think the US Federal Emergency Management Agency's removal of the term "climate change" from all their strategic planning documents is evidence of an... Read more

Hi All, 

As I mentioned at the summit, I'd like to start a discussion thread on knowledge management, company Intranets, and limiting Information overload as it pertains to sustainability. Those who are interested can share thoughts and experiences via this thread and maybe we'll set up an occasional phone call.  

Here are the... Read more

Upman LaTole

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

Hi: I'm writing to share a unique opportunity to make a difference at SCALE as a Sustainability Manager at Amazon Global Services.

This comes from Lisa Matthiessen, FAIA, LEED Fellow who some of you may know. Lisa just joined Amazon's Worldwide Sustainability Team who is charged with making real their Net Zero for all operations by 2040... Read more