Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Kristen Fritsch, in the thread about ipe wood, asked about resources comparing the carbon footprint of transporting building materials vs the transport mode.  There are people who spend their lives on this topic that I won't presume to speak for, but I'll share a few observations:

Even though freight transport is something like 7% of... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Hello, fellow SDLs, 

I wanted to share an opportunity for you - or those in your network - to join a passionate team of architects and designers based in Anchorage, Alaska. I'm told that you'd be asked to join the full team in Anchorage a few times a year for team building events but otherwise you can WFW (work from wherever!).

I... Read more

Hello Green Gurus,

Here is the information for December's Peer Networks Webinar, Architects in the Blue Zone: The AIA at COP26. We hope you will join us!

Register HERE

Architects in the Blue Zone: The AIA at COP26
Wednesday, December 15th, 2021
4pm - 5pm ET (1pm - 2pm PT)

Description

The American... Read more

Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

Welcome to the quiz portion of Building Re-Entry with Arc

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the similarities and differences between LEED v4.1 O+M performance metrics and the Arc Re-Entry program.

2.  Understand how Arc Re-Entry contributes to an iterative re-... Read more

Do you have the authority to start using only EVs in your renderings?  Let’s normalize and accelerate this change!

https://en.wikipedia.org/wiki/List_of_production_battery_electric_vehicles

Why are we showing gas cars in renderings of our green buildings?

I've got exciting news to share! Ayers Saint Gross' JUST disclosure went live on Monday. See our blog post about it here: https://asg-architects.com/ideas/blog/. That has a link out to our actual disclosure as well. It's been a bananas week with our internal communications campaign on it in full swing. I know a number of your firms, based on... Read more

Hi all,

I am on the planning committee for the National Adaptation Forum, which is an excellent conference (this will be the 6th annual) that has relatively little representation from architecture and engineering audiences. Our municipal and agency clients, as well as private sector, tend to attend this conference for climate adaptation... Read more

Hi everyone -
Some of you already have heard some or all of this news, but I thought I'd share today's press release with the whole group.
The headline is: 
SERA is VERY excited to announce that David Johnson, formerly the managing partner of Bill McDonough's San Francisco office, is now heading up SERA's bay area office.... Read more

Welcome to the quiz portion of Energy Modeling for Early Design Decisions (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the key... Read more

Hi MEP Leaders,

Just a reminder that our monthly call is next Tuesday, July 11, at 2pm ET. Chris Colasanti will be presenting on impacts of different facade characteristics on overall energy performance! 

All Network members are welcome to join. Here is the agenda, and below is the Zoom info:

Join Zoom Meeting
https... Read more

Greetings, all:

AIA COTE Advocacy is working with AIA Gov't Affairs to assemble a directory of COTE-friendly AIA Members who are passionate about environmental advocacy and VOTERS in targeted congressional districts. We are organizing in-district meetings after the mid-term elections focused on the members of the Senate Energy &... Read more

Anyone has experience with CertiPUR-US? I’m having a hard time finding assurance documentation for foam padding for seating.

I would appreciate any feedback or experience on CertiPUR-US program or any recommendations on product.

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Hi All,

Elkus Manfredi Architects in Boston is looking to fill a few positions -if you know of anyone looking in the Boston area, plesae let me know or send them my way. Kfritsch@elkus-manfredi.com

Specifically looking for an entry-level person with specialized expertise in parametric modeling, conceptual energy modeling and... Read more