Conventional stormwater management treats rain as the enemy—a dangerous and destructive force that must be deflected away from building sites as quickly as possible.

But as we pave more and more of paradise,... Read more

This may seem a bit in the weeds, but I have typically paid extra at Greenbuild for the access to the materials after the conference - we use that to develop presentations back to the teams who are not able to attend. For many years it was helpful - getting some materials to help folks see what they missed.  Last year they went to a new service... Read more

Anyone using the USG EcoSmart drywall? I'm writing a short product review and am looking for some quick feedback. I'm particularly curious about reduced greenhouse gas emissions and overall cost. Thanks! Brent

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Anyone have experience with electric boilers? I think in cold climates it's perhaps the first thought when trying to reduce scope 1 emissions in an HVAC application that would have historically used gas-fired boilers... but it seems like they're only an incremental improvement compared to heat pumps / geothermal / VRF type solutions. We haven't... Read more

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Bobbie Socks

Thought this was worth sharing - Lance Davis, who manages the P100 program for GSA just posted to an email group i belong to that the GSA P100 program is to be updated in 2024.  In service to that, there is a "P100 Change Proposal Form" available for folks to make helpful suggestions.

They are asking for suggestions, i think we should... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad.  We are mostly good people.  And, we need good people. 

Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role.  If you or someone you know is brimming with the sustainability force, please... Read more

Something we seem to be seeing a lot in our market recently are projects split into multiple packages - footing / foundation, C&S, and then later a TI package of CD's... mostly in an effort to speed up permitting and construction schedules. (Oftentimes with a contractor on board for a design / build approach). 

My question to the... Read more

Is EV100 on your radars? We're reviewing our company leases and aleady have employee free access to EV charging at our office and jobsites by request (if technically feasible).

"With businesses owning over half of all new registered vehicles on the road, it is crucial that companies lead the shift to electric vehicles." Does your role in... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

I'm wondering if people are seeing any increase in WELL or Fitwel certification interest? Or any other 3rd party systems aimed at health and wellness? WELL seems like a higher bar and now WELL v2 offers more flexibility. Is interest and adoption of 3rd party health and wellness certs growing? 

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more