What’s the net present value of that extra insulation? Join us on Tuesday, June 25th at 2:00 pm Eastern for a Peer Networks webinar on “Balancing Embodied and Operating Carbon.” Bill Smarzewski and Jason Fierko of Ewing Cole have developed a method for combining energy modeling with embodied carbon data to determine the carbon “payback” of... Read more

All,

Some of my colleagues and I have been working to promote interest in mass timber construction for K-12 builidngs.  As part of that effort we redesigned a large high school using mass timber in lieu steel, and conducted a whole building life cycel assessment to measure the reduction in embodied carbon.  We also conducted a program-... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

Hello Everyone,

Here is the 2019 SCL Demographics Report, thank you to everyone who submitted responses. Enjoy!

The SCL Salary Survey Report will be coming next and please note that the Salary Survey is only distributed to those who participated.

All the best,

RoseAnn

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Hi SCL,

It's my first time posting in the SCL group, as a somewhat new member. I'm grateful for any input you can provide to me!

My company, Nibbi Brothers, is currently brainstorming how to roll out an EV incentive program to employees. We recently polled our staff to get a general idea of where they stood with EV in terms of... Read more

Hi all! During our Contractor’s Commitment call last week Amanda made a great point about sharing of waste data to gain some realistic, current metrics. Just like I assume many of you, we have both seen a decline in successful diversion these last few years and our companies’ overall percentages have taken a hit. In an effort to gain a full... Read more

Hi all,

For your planning purposes for next year, here’s info on in-person events coming up in 2024:

As you may remember, our Summer 2024 SDL Summit will be July 15-17, 2024 at IslandWood on Bainbridge Island! Tickets will be $1800, which includes the cost of meals and lodging.

We are excited to announce we will also be... Read more

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

Hi all, 

Following the SCL Summit back in November, the Waste Subgroup agreed to complete a Model Waste Management Plan to serve as a contractor commitment to reduce construction waste. I distributed the attached (very rough) draft back in Jan., and received some good feedback via forum comments. 

We would like to set up a call to... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Should housing be affordable? Or should it be sustainably designed, built, and operated?

When you put it like that, the question sounds absurd.

But the idea—usually unspoken—that sustainability wastes precious time and resources is painfully common in the... Read more

My dear collegues,

As I'm sure is true for many of us, the events of the past weeks (months/years/decades...) have emphatically reinforced to me the need for a radical shift in how we meaningfully address JEDI in what we do. One (admittedly small) step I've been thinking about are the statements of reconciliation that have become more... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

HGA is seeking a Sustainable Materials Specialist to join our team! 

The role involves working with project teams to educate, research, and support decision-making related to sustainable materials and, in connection with sustainability experts across the firm, developing resources and tools to elevate HGA’s materials baseline.

The... Read more

HI Green Gurus. Great news for those who signed the petition to WHO last summer, and even those who didn't. The World Health Organization’s (WHO) released on March 1, 2021 a Roadmap to improve and ensure good indoor ventilation in the context of COVID-19. This document provides practical advice on how to mitigate COVID-19 through airborne... Read more