Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Welcome to the quiz portion of Protect Your Spec: 14 Strategies. 

Learning Objectives
Upon completing this course, participants will be able to:


Identify ways to ensure continuity between the environmentally preferable materials in a project specification, and the less-than-ideal materials that end up used in the final... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

Hello Green Gurus,

On October 5th a number of Sustainable Design Leaders gathered for the Fall 2021 SDL Virtual Summit and the BuildingGreen team is happy to now share with you all the event report here!

This report can be shared publicly. If you think someone would like to see it, such as firm leadership or prospective Peer... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

Welcome to the quiz portion of Can Commercial Kitchens Go Electric?

Learning Objectives
Upon completing this course, participants will be able to:


Understand why building electrification can be better for the environment and human health than use of fossil fuels, including natural gas.

List eight reasons... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

Just highlighting a tool from Circular Ecology (the group that brings you the Inventory of Carbon and Energy data) for measuring Scope 1 and 2

https://circularecology.com/organisational-carbon-footprint-tool.html

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

This webinar took place Thursday, January 12th at 2:00pm Eastern (11:00am Pacific)

Free to premium subscribers ($30.00 for non-premium)

Green building product selection is a mess.

With an overwhelming number of green product... Read more

Hi - We have some projects within reasonable reach of ILFI's Zero Carbon Certification, which will require purchasing some off-site renewable energy. As a State Building Code Council member, I'm also eyeing the Zero Code which we will seriously consider in the next 12 months; this also requires a purchase of off-site renewable energy. 

I... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

In trying to help a client write a case study on avoided carbon by using slag and flyash, I am having trouble finding a one for one equivalency that can be verified.

I have found for one pound of flyash, one pound of carbon is saved - but I can't verify that.

Appreciate the feedback!

Has anyone seen a comparison between IECC 2021 and previous versions of the energy code, including ASHRAE 2010? I'm curious how far ahead code buildings are relative to LEED v4.0, and how much the latest IECC raises the bar relative to the previous. I did a quick search for the LBNL and other studies that look at this, but didn't see anything... Read more