We're now mid-way through Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early in addition to... Read more

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

If you want to know more about the MEP 2040 Challenge, our first quarterly forum will be held on March 18th, 2022 11 am to 1 pm Eastern, and will be discussing decarbonization in the MEP space.  See link below for the agenda and registration.

https://network.carbonleadershipforum.org/civicrm/mailing/view?id=206&reset=1

I... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Hi everyone,

During the "Integrating Social Sustainability" session at the Winter Summit, an idea was hatched to form a working group dedicated to understanding how equity services can benefit a client's pro forma. Our first step (of course) is to identify the range of services captured under "equity services" and we'd love to speak with... Read more

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

You’ve probably heard that wood products are carbon neutral. You might also have heard that timber harvesting causes immense carbon emissions.

Which is it?

Could it be both?

Does anyone have a spreadsheet or chart that compares the new Fitwel v2.1 with Fitwel v2.0 ?

I can't seem to find such a thing on the Fitwel website.

I am trying to determine which version-route to take on our "Workplace" project.

Or do you have experience in this that you can relay?

Thanks.

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

I really appreciated our day on Tuesday--seems that we had a great inaugural Summit, and covered a lot of important ground. 

Here are the raw notes (flip-chart pages) from the day. Some of us came away with Action Items--see the list on the last page. 

Five-minute presentation decks and a more polished report to follow shortly. We... Read more

Hi,

HKS is seeking two seasoned sustainability leaders to be part of the DesignGreen Team embedded into either our Mission Critical and Commercial Mixed Use practice. In general, the role is to service clients and drive sustainable design quality forward. We have a great team and need even more wise, energetic, creative, and committed... Read more

Welcome to the quiz portion of Designing for the Next Century's Weather

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand how to adjust building designs to rising temperatures and humidity.
2. Recognize how climate-responsive buildings may not respond as expected in... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

SDL folks,

I wanted to make sure that you all saw that the call for presentations is open for AIA Houston’s Gulf Coast Green conference.  GCG is the leading sustainable design conference in the region and has historically had some great participation from this group.  The theme this year is Sustainability + Technology.  Details here:... Read more

Pierce Quéry, Roving Reporter

Hi - some of you may have received an invite to the White House for a 3-hr session to continue the discussion on the Net Zero Emissions building that they released earlier this year. This discussion will be on embodied carbon. I have no idea who the invite went to. If I beg I may be able to go, but if there are plenty of other Architects that... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

Welcome to the quiz portion of Avoiding the Global Warming Impact of Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define “embodied global warming potential” and “lifetime global warming potential” as they relate to insulation materials.
2. Describe why some... Read more