Does anyone have a "healthy material" exterior bleacher benchtop (beyond natural wood or metal) recommendation for a public high school track and field? 

How do we discern between fiberglass, recycled plastic or HPDE?  Is there a rule of thumb on how to advocate for specifying a "not as bad" material? 

The project is in a coastal... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Buildings aren’t garbage. But you wouldn’t know it by examining the way the AEC industry works. 

We typically design buildings for a single, limited purpose. We build them partly out of plastics that can’t be readily recycled. We choose diverse materials... Read more

One week until our AdRESS conference in Houston! Nadav and I hope to see some of you there. Check out the latest announcement.

All,

The Idaho Division of Occupational and Professional Licenses (DOPL) has undertaken the Zero-Based-Rulemaking process this year to eliminate all requirements that are not specifically life-safety related.  As such, they have proposed removing the International Energy Conservation Code (IECC) 2018 provisions regarding commissioning... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Financial literacy and speaking with clients on their terms. Guiding Questions:

Do you have the authority to start using only EVs in your renderings?  Let’s normalize and accelerate this change!

https://en.wikipedia.org/wiki/List_of_production_battery_electric_vehicles

Why are we showing gas cars in renderings of our green buildings?

Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

Hello SCL, 

If you didn't attend last week's SCL Summit, then I'll sum up one of the major takeaways: SCL members NEED TO COMMENT ON LEEDV5. The stakes are high, particularly around waste. 

Luckily, Amanda Kaminsky is making it easy for us. She has drafted a sample comment based on our discussion at the Summit. 

If you have... Read more

Peeps, in case you haven't gotten the email blasts--the AIA wants YOU! Now is the time to throw your hat into the ring for volunteering on the following committees/groups: 

Hi folks, 

We all need some more fun and now that we are all breathing better - let's do it!

WHAT is the "Lighter Side of Green" (LSG) ?

You all are rockstars in the Green world, but what about your other talents? LSG is a show where we will highlight the artistic and comedic talents of our Green Building community!... Read more

Hi folks,

Oregon’s ZERO Coalition is looking for responses to the question below on local policy for electrification, and I thought tapping this group would be helpful.

Are you aware of any local governments outside of Oregon that are promoting or enforcing electrification?

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

We've been doing some work gathering actual energy data on our recent projects. (In January we actually issued a report on 21 public buildings ). 

One of the biggest issues is getting access to the actual data - many clients don't want to share. 

Has anyone crafted proposal or contract language allowing/requiring design team... Read more

Hello, fellow SDLs, 

I wanted to share an opportunity for you - or those in your network - to join a passionate team of architects and designers based in Anchorage, Alaska. I'm told that you'd be asked to join the full team in Anchorage a few times a year for team building events but otherwise you can WFW (work from wherever!).

I... Read more

The Sustainable Design Leaders group has had awesome, inspiring Summits for ten years now—and there is so much more we can do can to make it a thriving, essential year-round community. To do that we have to extend the trusted “safe space” of the Summits into our online conversations.

And other groups are just getting started on a... Read more