Forum topic
Hey SDL,
I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more
Forum topic
Dear SDL: Thanks to all who have already given their support to the AIA Resolution on Urgent and Sustained Climate Action. We're into the final push of getting out the vote to pass the resolution next Wednesday, June 5th afternoon in Las Vegas. This requires 2/3s of the voting delegates to pass. So we're asking anyone who 1) is attending as a... Read more
Forum topic
Hi Everyone- as a follow up to the 5 minute presentation I did during the recent Virtual Summit-Palooza, I am pleased to announce that the Sustainability Action Plan Guidance Document created by the AIA 2030 Working Group is finished and released. Please share!
http://content.aia.org/sites/default/files/2021-03/... Read more
Reports, Courses, Study Guides, Live Webinars
THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.
Thursday, April 4 at 2:00pm Eastern (11:00am Pacific), and featuring:Katrina Amaral
Timberdoodle Farm
Jacob Dunn
ZGF
Steve Rigdon
Yakama Forest Products
Jennifer Shakun
New England Forestry... Read more
Forum topic
Tomorrow is my last day at FXCollaborative before I head back to school. It has been such a gift to engage with you all over the past 10 years. Please stay in touch - my contact information is ilanajudah@gmail.com. I am headed out to UBC next week to do a deep dive into resilience and adaptation in urban environments.
FXCollaborative... Read more
Forum topic
Hello,
We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more
Forum topic
Hello SDL!
Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!
Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more
Product Guide
Composting toilets convert human waste into nutrient-rich fertilizer for nonfood plants, rather than mixing the waste with potable water and flushing it down the drain. They can also save infrastructure costs and minimize the burden on wastewater systems.
They’re not for every project, but they do warrant consideration. Composting... Read more
Forum topic
All,
I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more
Forum topic
Hello Green Gurus,
Now is a pivotal moment. Net Zero Stretch Code legislation has been proposed in the Massachusetts House and Senate, and draft code language is currently being developed by the Board of Building Regulations and Standards (BBRS). The Net Zero Stretch Code is currently the greatest single opportunity to support reduced... Read more
Product Guide
CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.
Constructed wetlands and other natural filtration systems close the nutrient and water loop, permitting safe and sustainable wastewater treatment and reuse right on the site.
BuildingGreen-Approved SystemsWe look for... Read more
Forum topic
All,
The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?
Thanks,
Jenny
--------... Read more
Forum topic
I received this email from Cathy Higgins at NBI, and thought some of you may know the right folks who might be interested:
---------------------
Hi colleagues,
You are exactly the folks that might know a high-caliber person to join NBI’s team. We are looking for someone ideally based in California but could be elsewhere with... Read more
Forum topic
Hi Carbon Working Group,
It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates. You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more
Forum topic
Hi Everyone,
Our Vancouver team is looking for some innovative, high performance building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more
Quiz
Welcome to the quiz portion of The Building Envelope: Innovations in Planning, Materials and Budgets (recorded webcast)
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain how to make the building envelope of a rehab super-insulated and resilient.
2. Recall innovative... Read more
Quiz
Welcome to the quiz portion of The BuildingGreen Guide to Insulation!
Learning Objectives
Upon completing this course, participants will be able to:
1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings;
2. Explain why certain materials make more sense than... Read more
Forum topic
On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more