Welcome to the quiz portion of Reexamining Priorities in Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define green building priorities from a few different angles (separating process priorities from outcome priorities).
2. Differentiate those priorities... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

Jill is a licensed architect with WELL and Living Future accreditation. Through her experience leading sustainable achievement and verification on projects in the workplace, K-12, civic, and retail/mixed use typologies, Jill brings her passion for sustainable materials across vetting categories, AEC disciplines, bid scenarios, and market... Read more

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

Welcome to the quiz portion of Introduction to Fitwel Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the different categories within Fitwel and the particular human health and wellness aspects.

2.  Describe the differences between Fitwel... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

Hey there hive mind,

We went looking through LEEDuser to try and find some direction and didn't find much so I thought I'd bring my team's question here to all of you smart people. We're working on a non-combustion central plant tied to a geothermal field and grid electricity. The project has cooling towers and their associated chemical... Read more

Hello Green Gurus!

Quick introduction as this is my first time posting - Louis Koehl, AIA, CPHD, Director of Sustainable Design at Handel Architects, based in NY. I recently joined the SDL Forum and met some of you at the regional summit and Greenbuild.  I'm excited to continue to connect with such an influential group! 

My... Read more

Hi all

I would like to warmly invite all of you to our Lyle Center for Regenerative Studies 25th anniversary events. I think the events are very pertinent to what this group is about and are all free. If you are in the LA area please come! The 11th includes an outdoor reception at the center after the presentations. It’s also an... Read more

Seeking Pros/Cons, Feedback/Commentary about signing the US Architects Declare Commitment. 

https://us.architectsdeclare.com/

Reviewing against the "shoulds" and "shalls" of the 2020 AIA Code of Ethics and Professional Conduct ... and other commitments that are out there ... any feedback welcome.

Tips for how your workflow... Read more

Hi All- I will be starting bi-weekly mtg for the PFAS working group to align on our goals as consicous firms and finalize our message aka 'letter to manufacturers' for reducing PFAS in building materials. Please email me (pgupta-garg@wrnsstudio.com) to let me know if you are interested in being a part of the group. First mtg will be next week... Read more

Guiding questions:

Hi All,

I'm teaching a class this semester at CU Boulder on Zero Carbon Buildings and Cities (a new class that I'm making up as I go). The hardest part, I'm finding, is locating some good materials that cover the basics of energy efficiency for non-building engineers or designers (we are energy and sustainability generalists in this... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

Welcome to the quiz portion of Shoebox Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the difference between a shoebox model and a whole-building energy simulation.
2. Approach shoebox modeling according to project type and software tool.
3.... Read more