Hey there hive mind,

We went looking through LEEDuser to try and find some direction and didn't find much so I thought I'd bring my team's question here to all of you smart people. We're working on a non-combustion central plant tied to a geothermal field and grid electricity. The project has cooling towers and their associated chemical... Read more

Hi all! I'm very excited to report that we have interest from a developer client in tracking embodied carbon through construction. We have issued construction documents and the construction managment team is begining the process to establish the GMP.

We're looking to use EC3, and/ or ZGF's LCA analysis tool for concrete to look at how we... Read more

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

Welcome to the quiz portion of Downscaled Climate Data: Where to Get It and How to Use It.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Define “downscaled climate data” and understand where to find it and how to apply it in modeling to achieve greater environmental sustainability and... Read more

We're expanding the capacity of our team, with two positions, a general project sustainability specialist as well as a more targeted position focused on the healthcare sector.

Healthcare Sustainability Specialist

Sustainability Specialist

In both cases, we're looking for smart, experienced people who understand the power... Read more

Hi All,

Structure Tone just released their annual Sustainability, Resiliency, and Wellness Report.

Download a copy here.  https://structuretone.com/sustainability/

I’m curious what people think.

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

Welcome to the quiz portion of Circular Economy at Scale: Six International Case Studies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define circular economy and explain its importance within the built environment.
2. Describe how to leverage long-term value over first... Read more

Has anyone here had success in comparing life cycle impacts for different window system options? We have been trying to compare different options but have only been able to source one expired EPD for an actual window (frame + glazing). Is the typical approach to separately compare glass and framing options? Are we missing something or is there... Read more

Hi folks,

I hope you're all doing well, despite the heat (thermal, political, social...ugh!).

We've had low turnout on the SAL monthly calls lately; it seems that these aren't a high priority for many of you. That's not necessarily a problem, if you're finding value in being in the network for other reasons, that's fine.

We... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

We have a client who just hired their first director of sustainability. That person is looking to connect with other people in similar roles within Healthcare / Hospital organizations. Does anyone have organizations they have worked with who have someone in this role (I know it is less common than other markets) or have a healthcare specific... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

I am looking for example specifications for low carbon concrete to have our structural engineer(s) review and incorporate.  Does anyone have good examples or  link(s) to good examples?

Thanks,

Mark